8101545 Festo Electric Actuators

8101545 Product Details

• KC characters
  KC EMC
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Additional functions
  User interface Integrated end-position sensing
• Power supply, connection pattern
  00995989
• Display
  LED
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Logic input specification
  Based on IEC 61131-2, type 1
• Characteristics of logic input
  Configurable Not galvanically isolated
• Logic interface, connection pattern
  00992264
• Logic interface, connection type
  Plug
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Logic interface, number of poles/wires
  8
• Nominal current
  3 A
• IO-Link®, port class
  A
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• Maintenance interval
  Life-time lubrication
• Feed constant
  32 mm/U
• Type code
  EPCE
• Ready status indication
  LED
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Max. current of digital logic outputs
100 mA
Max. current consumption
3000 mA
Product weight
894 g
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
IO-Link®, number of ports
1
Protection class
III
Drive pinion effective diameter
10.18 mm
Piston rod end
External thread
Symbol
00997342
Rotor position sensor measuring principle
Magnetic
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Max. feed force Fx
85 N
Reference value, running performance
300 km
Additional moving mass per 10 mm stroke
0.455 g
Piston rod material
High-alloy stainless steel
Max. cable length
15 m outputs 20 m for IO-Link® operation
Input switching logic
PNP (positive switching)
Switching logic at outputs
PNP (positive switching)
Characteristics of digital logic outputs
Configurable Not galvanically isolated
DC nominal voltage
24 V
Power supply, number of pins/wires
4
Rotor position sensor resolution
16 bit
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, minimum cycle time
1 ms
IO-Link®, data memory required
500 byte
Toothed belt pitch
2 mm
Size
45
Piston rod thread
M6
Design
Electric actuator With integrated drive
Homing
Fixed stop block positive Fixed stop block, negative
Repetition accuracy
±0.05 mm
Storage temperature
-20 °C ... 60 °C
Certification
RCM compliance mark
Impact energy in the end positions
0.003 J
Additional weight per 10 mm stroke
29 g
Parameterization interface
IO-Link® User interface
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Toothed belt elongation
0.31 %
Stroke reserve
0 mm
Motor type
Stepper motor
Rotor position sensor
Absolute encoder, single-turn
Max. speed
0.44 m/s
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
0 °C ... 50 °C
Guide value for payload, horizontal
5 kg
Moving mass at 0 mm stroke
87 g
Power supply, type of connection
Plug
Number of digital logic outputs 24 V DC
2
Number of digital logic inputs
2
Work range of logic input
24 V
IO-Link®, SIO mode support
Yes
IO-Link®, process data width IN
2 Byte
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, Connection technology
Plug
Toothed belt material
Polychloroprene with glass fiber
Stroke
30 mm
Mounting position
Any
Protection against torsion/guide
With plain-bearing guide
Insulation protection class
B
Relative air humidity
0 - 90 %
Max. torque Mz
0.4 Nm
Guide value for payload, vertical
2.5 kg
Cover material
Wrought aluminum alloy, anodized
Position sensing
Motor encoder
Max. acceleration
9 m/s²
Duty cycle
100%
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. torque Mx
0 Nm
Max. torque My
0.4 Nm
Basic weight with 0 mm stroke
807 g
Type of mounting
With through-hole With accessories
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Housing material
Wrought aluminum alloy, anodized

Product condition

Related documents 8101545 Specs