8101539 Festo Electric Actuators
Part#:8101539
Manufacturer:Festo
Alt. Part#:EPCE-TB-45-10-FL-ST-M-H1-PLK-AA
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: electric cylinder unit EPCE-TB-45-10-FL-ST-M-H1-PLK-AA Effective diameter of drive pinion: 10,18 mm, Size: 45, Stroke: 10 mm, Stroke reserve: 0 mm, Piston rod thread: M6
About the manufacturer: For more than 40 years in the United States and 80 years globally, Festo Corp. has been a positive force for manufacturers. The company's passion is automation & intelligent automation solutions that transform the way people work and the way companies com
Check out the 8101539 Festo price in the box on the right side or send a quick quote.
8101539 Product Details
- Input switching logic PNP (positive switching)
- Power supply, connection pattern 00995989
- Max. current of digital logic outputs 100 mA
- Nominal current 3 A
- IO-Link®, process data width IN 2 Byte
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Ready status indication LED
- Additional functions User interface Integrated end-position sensing
- Logic interface, connection pattern 00992264
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Logic interface, number of poles/wires 8
- Work range of logic input 24 V
- Product weight 804 g
- IO-Link®, SIO mode support Yes
- IO-Link®, communication mode COM3 (230.4 kBd)
- Drive pinion effective diameter 10.18 mm
- Feed constant 32 mm/U
- Stroke 10 mm
- Position sensing Motor encoder
- Max. acceleration 9 m/s²
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Storage temperature -20 °C ... 60 °C
- Guide value for payload, vertical 2.5 kg
- Additional weight per 10 mm stroke 29 g
- Cover material Wrought aluminum alloy, anodized
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Switching logic at outputs PNP (positive switching)
- Power supply, type of connection Plug
- Number of digital logic outputs 24 V DC 2
- Rotor position sensor resolution 16 bit
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, protocol version Device V 1.1
- IO-Link®, Connection technology Plug
- Size 45
- Mounting position Any
- Motor type Stepper motor
- Homing Fixed stop block positive Fixed stop block, negative
- Rotor position sensor measuring principle Magnetic
- Duty cycle 100%
- Certification RCM compliance mark
- Reference value, running performance 100 km
- Additional moving mass per 10 mm stroke 0.455 g
- Housing material Wrought aluminum alloy, anodized
- Max. torque Mz 0.4 Nm
- KC characters KC EMC
- Logic input specification Based on IEC 61131-2, type 1
- Characteristics of logic input Configurable Not galvanically isolated
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Logic interface, connection type Plug
- Number of digital logic inputs 2
- Power supply, number of pins/wires 4
- IO-Link®, port class A
- IO-Link®, minimum cycle time 1 ms
- Toothed belt elongation 0.31 %
- Type code EPCE
- Design Electric actuator With integrated drive
- Rotor position sensor Absolute encoder, single-turn
- Insulation protection class B
- Relative air humidity 0 - 90 %
- Max. torque Mx 0 Nm
- Impact energy in the end positions 0.003 J
- Guide value for payload, horizontal 5 kg
- Type of mounting With internal thread With accessories
- Display LED
- Parameterization interface IO-Link® User interface
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- DC nominal voltage 24 V
- Max. current consumption 3000 mA
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- IO-Link®, process data width OUT 2 Byte
- IO-Link®, number of ports 1
- Protection class III
- Maintenance interval Life-time lubrication
- Piston rod thread M6
- Piston rod end External thread
- Protection against torsion/guide With plain-bearing guide
- Repetition accuracy ±0.05 mm
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Ambient temperature 0 °C ... 50 °C
- Moving mass at 0 mm stroke 83 g
- Piston rod material High-alloy stainless steel
- IO-Link®, data memory required 500 byte
- Toothed belt material Polychloroprene with glass fiber
- Toothed belt pitch 2 mm
- Stroke reserve 0 mm
- Symbol 00997342
- Max. speed 0.44 m/s
- Permissible voltage fluctuations +/- 15 %
- Degree of protection IP40
- Max. torque My 0.4 Nm
- Max. feed force Fx 85 N
- Basic weight with 0 mm stroke 775 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8101539 Specs
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨