8101540 Festo Electric Actuators
Part#:8101540
Manufacturer:Festo
Alt. Part#:EPCE-TB-45-20-FL-ST-M-H1-PLK-AA
Product Lifecycle:Active
Get a quick Quote!
electric cylinder unit EPCE-TB-45-20-FL-ST-M-H1-PLK-AA Effective diameter of drive pinion: 10,18 mm, Size: 45, Stroke: 20 mm, Stroke reserve: 0 mm, Piston rod thread: M6
About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8101540 Festo price in the box on the right side or send a quick quote.
Product Details
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Logic input specification Based on IEC 61131-2, type 1
- Switching logic at outputs PNP (positive switching)
- Logic interface, connection type Plug
- Number of digital logic outputs 24 V DC 2
- Work range of logic input 24 V
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, process data width IN 2 Byte
- IO-Link®, communication mode COM3 (230.4 kBd)
- IO-Link®, Connection technology Plug
- Size 45
- Piston rod thread M6
- Piston rod end External thread
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Additional functions User interface Integrated end-position sensing
- Parameterization interface IO-Link® User interface
- Logic interface, connection pattern 00992264
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Max. current of digital logic outputs 100 mA
- KC characters KC EMC
- Display LED
- Characteristics of logic input Configurable Not galvanically isolated
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- DC nominal voltage 24 V
- Logic interface, number of poles/wires 8
- IO-Link®, SIO mode support Yes
- IO-Link®, port class A
- IO-Link®, minimum cycle time 1 ms
- Drive pinion effective diameter 10.18 mm
- Toothed belt pitch 2 mm
- Mounting position Any
- Position sensing Motor encoder
- Motor type Stepper motor
- Repetition accuracy ±0.05 mm
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Ambient temperature 0 °C ... 50 °C
- Max. torque My 0.4 Nm
- Guide value for payload, horizontal 5 kg
- Guide value for payload, vertical 2.5 kg
- Additional moving mass per 10 mm stroke 0.455 g
- Duty cycle 100%
- Input switching logic PNP (positive switching)
- Power supply, connection pattern 00995989
- Power supply, type of connection Plug
- Max. current consumption 3000 mA
- Power supply, number of pins/wires 4
- IO-Link®, protocol version Device V 1.1
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- Protection class III
- Feed constant 32 mm/U
- Type code EPCE
- Symbol 00997342
- Max. acceleration 9 m/s²
- Permissible voltage fluctuations +/- 15 %
- Storage temperature -20 °C ... 60 °C
- Max. feed force Fx 85 N
- Moving mass at 0 mm stroke 83 g
- Type of mounting With internal thread With accessories
- Housing material Wrought aluminum alloy, anodized
- Insulation protection class B
- Ready status indication LED
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Number of digital logic inputs 2
- Product weight 833 g
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- IO-Link®, process data width OUT 2 Byte
- IO-Link®, number of ports 1
- Toothed belt material Polychloroprene with glass fiber
- Stroke 20 mm
- Design Electric actuator With integrated drive
- Rotor position sensor Absolute encoder, single-turn
- Impact energy in the end positions 0.003 J
- Max. torque Mx 0 Nm
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Rotor position sensor resolution 16 bit
- Nominal current 3 A
- IO-Link®, data memory required 500 byte
- Maintenance interval Life-time lubrication
- Toothed belt elongation 0.31 %
- Stroke reserve 0 mm
- Protection against torsion/guide With plain-bearing guide
- Rotor position sensor measuring principle Magnetic
- Relative air humidity 0 - 90 %
- Max. torque Mz 0.4 Nm
- Additional weight per 10 mm stroke 29 g
- Cover material Wrought aluminum alloy, anodized
- Homing Fixed stop block positive Fixed stop block, negative
- Max. speed 0.44 m/s
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Degree of protection IP40
- Certification RCM compliance mark
- Reference value, running performance 200 km
- Basic weight with 0 mm stroke 775 g
- Piston rod material High-alloy stainless steel
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8101540 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨