567504 Festo Directional Control Valves

567504 Product Details

• Valve function
  2/2, closed, monostable
• Operating pressure
  0.5 bar ... 6 bar
• Operating voltage
  24V DC
• Operating conditions to DIN VDE 0580
  S3 50% 20min. for single pneumatic valve S3 25% 20 min for block assembly
• Sealing principle
  Hard
• Switching time on at 0.5 bar and 24 V in new condition
  1 ms
• Switching time on at 6 bar and 24 V in new condition
  1.3 ms
• Information on operating and pilot media
  Operation with oil lubrication not possible
• Permissible solenoid surface temperature
  120 °C
• Pneumatic connection 1
  QS-1/4
• Seals material
  HNBR
• Width
  10 mm
• Reset method
  Pneumatic spring
• Mounting position
  Any
• Symbol
  00992259
• Switching time on at 4 bar and 24 V in new condition
  1.2 ms
• Switching time off at 6 bar and 24 V in new condition
  0.6 ms
• Coil characteristics
  24 V DC: low-current phase 3.2 W, high-current phase 14.5 W
• CE marking (see declaration of conformity)
  As per EU EMC directive
• Cable length
  2.5 m
Note on materials
RoHS-compliant
Input resistance
34 kOhm
Pneumatic working port
QS-1/4
Certification
RCM compliance mark
Type of control
Direct
Reverse polarity protection
for operating voltage
Max. switching frequency
500 Hz
Switching time off at 4 bar and 24 V in new condition
0.6 ms
DC operating voltage range
21.6 V ... 26.4 V
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Storage temperature
-20 °C ... 50 °C
Product weight
85 g
Material of cable sheath
PUR
Housing material
PA-reinforced PPS-reinforced
Note on input current
Linear increase 0.44-15.44 mA for a trigger signal of 15-30 V
Standard nominal flow rate
160 l/min
Degree of protection
IP65
Type code
MHJ10
Information on operation
Power supply unit must be able to supply at least 1.7 A without voltage drop. Do not operate without flow.
Additional functions
Spark suppression Safety shut-down
b-value
0.36
Tolerance for switching time off
+15 %/-25 %
Trigger signal range DC
3 V ... 30 V
Restricted ambient and media temperature
Depending on the switching frequency (see diagram)
Temperature of medium
-5 °C ... 60 °C
Type of mounting
Optionally: With through-hole
Material of screws
Steel
KC characters
KC EMC
Actuation type
Electrical
Design
Poppet valve without return spring
Width dimension
10.5 mm
Manual override
None
Flow direction
Non-reversible
C value
0.66 l/sbar
Switching time off at 0.5 bar and 24 V in new condition
0.8 ms
Tolerance for ON switching time
+/-15 %
Permissible voltage fluctuations
+/- 10 %
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Ambient temperature
-5 °C ... 60 °C
Electrical connection
3-wire Cable
Pneumatic connection 2
QS-1/4

Product condition

Related documents 567504 Specs