567503 Festo Directional Control Valves

567503 Product Details

• KC characters
  KC EMC
• Width
  10 mm
• Operating voltage
  24V DC
• Width dimension
  10.5 mm
• Sealing principle
  Hard
• Manual override
  None
• Max. switching frequency
  500 Hz
• C value
  0.66 l/sbar
• Switching time off at 4 bar and 24 V in new condition
  0.6 ms
• Coil characteristics
  24 V DC: low-current phase 3.2 W, high-current phase 14.5 W
• Storage temperature
  -20 °C ... 50 °C
• Product weight
  85 g
• Cable length
  2.5 m
• Seals material
  HNBR
• Pneumatic working port
  QS-6
• Reset method
  Pneumatic spring
• Information on operation
  Power supply unit must be able to supply at least 1.7 A without voltage drop. Do not operate without flow.
• Symbol
  00992259
• Switching time off at 0.5 bar and 24 V in new condition
  0.8 ms
• Tolerance for ON switching time
  +/-15 %
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Electrical connection
3-wire Cable
Pneumatic connection 1
QS-6
Note on materials
RoHS-compliant
Material of screws
Steel
Note on input current
Linear increase 0.44-15.44 mA for a trigger signal of 15-30 V
Actuation type
Electrical
Design
Poppet valve without return spring
Operating conditions to DIN VDE 0580
S3 50% 20min. for single pneumatic valve S3 25% 20 min for block assembly
Type of control
Direct
Additional functions
Spark suppression Safety shut-down
Switching time on at 0.5 bar and 24 V in new condition
1 ms
Tolerance for switching time off
+15 %/-25 %
Trigger signal range DC
3 V ... 30 V
Restricted ambient and media temperature
Depending on the switching frequency (see diagram)
Temperature of medium
-5 °C ... 60 °C
Permissible solenoid surface temperature
120 °C
Pneumatic connection 2
QS-6
Material of cable sheath
PUR
Valve function
2/2, closed, monostable
Operating pressure
0.5 bar ... 6 bar
Degree of protection
IP65
Certification
RCM compliance mark
Mounting position
Any
Reverse polarity protection
for operating voltage
Switching time on at 4 bar and 24 V in new condition
1.2 ms
Switching time on at 6 bar and 24 V in new condition
1.3 ms
Switching time off at 6 bar and 24 V in new condition
0.6 ms
Information on operating and pilot media
Operation with oil lubrication not possible
CE marking (see declaration of conformity)
As per EU EMC directive
Type of mounting
Optionally: With through-hole
Housing material
PA-reinforced PPS-reinforced
Input resistance
34 kOhm
Standard nominal flow rate
160 l/min
Type code
MHJ10
Flow direction
Non-reversible
b-value
0.36
DC operating voltage range
21.6 V ... 26.4 V
Permissible voltage fluctuations
+/- 10 %
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Ambient temperature
-5 °C ... 60 °C

Product condition

Related documents 567503 Specs