567502 Festo Directional Control Valves

567502 Product Details

• Valve function
  2/2, closed, monostable
• Operating pressure
  0.5 bar ... 6 bar
• Design
  Poppet valve without return spring
• Certification
  RCM compliance mark
• Sealing principle
  Hard
• Manual override
  None
• Additional functions
  Spark suppression Safety shut-down
• b-value
  0.36
• Switching time on at 0.5 bar and 24 V in new condition
  1 ms
• DC operating voltage range
  21.6 V ... 26.4 V
• Coil characteristics
  24 V DC: low-current phase 3.2 W, high-current phase 14.5 W
• Storage temperature
  -20 °C ... 50 °C
• Type of mounting
  On sub-base
• Housing material
  PA-reinforced PPS-reinforced
• Note on input current
  Linear increase 0.44-15.44 mA for a trigger signal of 15-30 V
• Standard nominal flow rate
  160 l/min
• Pneumatic working port
  Sub-base
• Information on operation
  Power supply unit must be able to supply at least 1.7 A without voltage drop. Do not operate without flow.
• Max. switching frequency
  500 Hz
• Switching time on at 6 bar and 24 V in new condition
  1.3 ms
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Temperature of medium
-5 °C ... 60 °C
Max. tightening torque for valve mounting
0.7 Nm
Pneumatic connection 1
Sub-base
Seals material
HNBR
KC characters
KC EMC
Width
10 mm
Reset method
Pneumatic spring
Type code
MHJ10
Type of control
Direct
C value
0.66 l/sbar
Switching time off at 4 bar and 24 V in new condition
0.6 ms
Switching time off at 6 bar and 24 V in new condition
0.6 ms
Permissible voltage fluctuations
+/- 10 %
Trigger signal range DC
3 V ... 30 V
Restricted ambient and media temperature
Depending on the switching frequency (see diagram)
Electrical connection
3-wire Cable
Pneumatic connection 2
Sub-base
Material of cable sheath
PUR
Input resistance
34 kOhm
Operating voltage
24V DC
Width dimension
10.5 mm
Mounting position
Any
Symbol
00992259
Reverse polarity protection
for operating voltage
Switching time off at 0.5 bar and 24 V in new condition
0.8 ms
Tolerance for ON switching time
+/-15 %
Information on operating and pilot media
Operation with oil lubrication not possible
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Permissible solenoid surface temperature
120 °C
Product weight
75 g
Material of screws
Steel
Actuation type
Electrical
Degree of protection
IP65
Operating conditions to DIN VDE 0580
S3 50% 20min. for single pneumatic valve S3 25% 20 min for block assembly
Flow direction
Non-reversible
Switching time on at 4 bar and 24 V in new condition
1.2 ms
Tolerance for switching time off
+15 %/-25 %
CE marking (see declaration of conformity)
As per EU EMC directive
Ambient temperature
-5 °C ... 60 °C
Cable length
2.5 m
Note on materials
RoHS-compliant

Product condition

Related documents 567502 Specs