5255427 Festo Servo Motors
Part#:5255427
Manufacturer:Festo
Alt. Part#:EMMT-AS-80-S-LS-RSB
Product Lifecycle:Active
Get a quick Quote!
About the product: servo motor EMMT-AS-80-S-LS-RSB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255427 Festo price in the box on the right side or send a quick quote.
5255427 Product Details
- Detent torque < 1.0% of peak torque
- Rotor position sensor for manufacturer designation ECI 1118
- Electrical connection 1, connection type Hybrid plug
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Measuring flange 250 x 250 x 15 mm, steel
- Max. brake no-load speed 10000 1/min
- Brake stopping current 0.37 A
- DC brake response delay ≤ 3 ms
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Max. rotational speed 6700 1/min
- Nominal rotary speed 3000 1/min
- Nominal operating voltage DC 325 V
- Thermal time constant 42 min
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Brake airflow 0.37 A
- Rotor position encoder for DC operating voltage 5 V
- Brake coil resistance 48 Ohm
- Brake separation time ≤ 55 ms
- Winding longitudinal inductivity Ld (phase) 10.2 mH
- Cross inductivity Lq (phase) 12.2 mH
- Thermal resistance 0.95 K/W
- Type code EMMT-AS
- Continuous stall current 3.1 A
- Motor nominal current 2.7 A
- Voltage constant, phase-to-phase 34.3 mVmin
- Relative air humidity 0 - 90 %
- Electrical connection for input 1, connection pattern 00995913
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Balancing quality G 2.5
- Brake current consumption 0.5 A
- Brake closing time ≤ 15 ms
- Standstill torque constant 0.57 Nm/A
- Rotor position sensor measuring principle Inductive
- Brake power consumption 12 W
- Motor nominal power 408 W
- Rotor position sensor resolution 18 bit
- Type of winding switch Star inside
- Storage temperature -20 °C ... 70 °C
- Total output inertia moment 1.64 kgcm²
- Nominal torque 1.3 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Product weight 2720 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Mounting position Any
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Electrical connection 1, number of pins/wires 15
- Certificate issuing authority UL E342973
- Max. mechanical speed 14000 1/min
- Storage lifetime, under nominal conditions 20000 h
- Electric time constant 4.9 ms
- Rotor position encoder for absolutely detectable revolutions 1
- Rotor position sensor Absolute encoder, single-turn
- Rotor position sensor interface EnDat® 22
- Brake DC operating voltage 24 V
- Phase-phase winding resistance 4.93 Ohm
- Rating class according to EN 60034-1 S1
- Thermal class according to EN 60034-1 F
- Brake mass moment of inertia 0.249 kgcm²
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Contamination level 2
- Motor type as per EN 60034-7 IM B5 IM V3
- Max. winding temperature 155 °C
- Max. installation height 4000 m
- Brake coil inductivity 1000 mH
- Number of pole pairs 5
- Max. brake friction work 8200 J
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Rotor position encoder for positional values per revolution 262144
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Motor constants 0.48 Nm/A
- Winding inductance phase-phase 16.3 mH
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Degree of protection IP40
- Certification RCM compliance mark c UL us - Recognized (OL)
- Peak torque 2.8 Nm
- Permissible axial shaft load 120 N
- Interface code, motor out 80P
- Peak current 8.4 A
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Ambient temperature -15 °C ... 40 °C
- Brake holding torque 4.5 Nm
- Stall torque 1.46 Nm
- MTTFd, subcomponent 380 years, rotor position sensor
- Permissible radial shaft load 620 N
- Conforms to standard IEC 60034
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 5255427 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
5255427
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
