5255536 Festo Servo Motors
Part#:5255536
Manufacturer:Festo
Alt. Part#:EMMT-AS-100-L-HS-RSB
Product Lifecycle:Active
Get a quick Quote!
servo motor EMMT-AS-100-L-HS-RSB Ambient temperature: -15 - 40 °C, Note on ambient temperature: Up to 80° C with derating of -2.25% per degree Celsius, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating o
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255536 Festo price in the box on the right side or send a quick quote.
Product Details
- Electrical connection for input 1, connection pattern 00995913
- Rotor position sensor for manufacturer designation ECI 1319
- Motor type as per EN 60034-7 IM B5 IM V3
- Brake airflow 0.73 A
- Detent torque < 1.0% of peak torque
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Certificate issuing authority UL E342973
- Electrical connection 1, number of pins/wires 15
- Max. mechanical speed 13000 1/min
- Brake stopping current 0.73 A
- Brake separation time ≤ 80 ms
- Motor nominal power 1870 W
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Rotor position encoder for positional values per revolution 524288
- Rotor position sensor Absolute encoder, single-turn
- Nominal rotary speed 2700 1/min
- Nominal operating voltage DC 565 V
- Brake power consumption 24 W
- Peak current 28.6 A
- Thermal class according to EN 60034-1 F
- Brake holding torque 18 Nm
- Permissible axial shaft load 200 N
- MTTFd, subcomponent 380 years, rotor position sensor
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Measuring flange 300 x 300 x 20 mm, steel
- Balancing quality G 2.5
- Rotor position encoder for DC operating voltage 5 V
- Brake current consumption 1 A
- Brake closing time ≤ 40 ms
- DC brake response delay ≤ 5 ms
- Standstill torque constant 1.75 Nm/A
- Type code EMMT-AS
- Rotor position sensor measuring principle Inductive
- Continuous stall current 6.7 A
- Type of winding switch Star inside
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Ambient temperature -15 °C ... 40 °C
- Nominal torque 6.6 Nm
- Permissible radial shaft load 1110 N
- Electrical connection 1, connection technology M23x1
- Mounting position Any
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Max. winding temperature 155 °C
- Max. installation height 4000 m
- Number of pole pairs 5
- Rating class according to EN 60034-1 S1
- Storage temperature -20 °C ... 70 °C
- Peak torque 30.5 Nm
- Stall torque 10.4 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Interface code, motor out 100A
- Electrical connection 1, connection type Hybrid plug
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Note on ambient temperature Up to 80 °C with derating of -2.25% per degree Celsius
- Contamination level 2
- Max. brake no-load speed 10000 1/min
- Brake coil resistance 24 Ohm
- Storage lifetime, under nominal conditions 20000 h
- Electric time constant 15.8 ms
- Winding longitudinal inductivity Ld (phase) 8.7 mH
- Rotor position encoder for absolutely detectable revolutions 1
- Thermal resistance 0.46 K/W
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Max. rotational speed 3770 1/min
- Motor constants 1.54 Nm/A
- Winding inductance phase-phase 15.7 mH
- Voltage constant, phase-to-phase 106 mVmin
- Relative air humidity 0 - 90 %
- Degree of protection IP40
- Total output inertia moment 8.06 kgcm²
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Conforms to standard IEC 60034
- Brake coil inductivity 900 mH
- Max. brake friction work 15000 J
- Cross inductivity Lq (phase) 11.8 mH
- Rotor position encoder system accuracy angle measurement -65 arcsec ... 65 arcsec
- Thermal time constant 71 min
- Rotor position sensor interface EnDat® 22
- Brake DC operating voltage 24 V
- Motor nominal current 4.3 A
- Rotor position sensor resolution 19 bit
- Phase-phase winding resistance 1.49 Ohm
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Certification RCM compliance mark c UL us - Recognized (OL)
- Brake mass moment of inertia 2.15 kgcm²
- Product weight 10100 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 5255536 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
