5255537 Festo Servo Motors
Part#:5255537
Manufacturer:Festo
Alt. Part#:EMMT-AS-100-L-HS-RMB
Product Lifecycle:Active
Get a quick Quote!
servo motor EMMT-AS-100-L-HS-RMB Ambient temperature: -15 - 40 °C, Note on ambient temperature: Up to 80° C with derating of -2.25% per degree Celsius, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating o
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255537 Festo price in the box on the right side or send a quick quote.
Product Details
- Brake coil inductivity 900 mH
- Note on ambient temperature Up to 80 °C with derating of -2.25% per degree Celsius
- Balancing quality G 2.5
- Electrical connection 1, connection type Hybrid plug
- Rotor position sensor for manufacturer designation EQI 1331
- Contamination level 2
- Electrical connection 1, number of pins/wires 15
- Brake current consumption 1 A
- DC brake response delay ≤ 5 ms
- Standstill torque constant 1.75 Nm/A
- Thermal resistance 0.46 K/W
- Thermal time constant 71 min
- Brake DC operating voltage 24 V
- Brake power consumption 24 W
- Type of winding switch Star inside
- Peak current 28.6 A
- Degree of protection IP40
- Ambient temperature -15 °C ... 40 °C
- Permissible axial shaft load 200 N
- Permissible radial shaft load 1110 N
- Conforms to standard IEC 60034
- Detent torque < 1.0% of peak torque
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Measuring flange 300 x 300 x 20 mm, steel
- Max. installation height 4000 m
- Max. brake no-load speed 10000 1/min
- Brake stopping current 0.73 A
- Storage lifetime, under nominal conditions 20000 h
- Cross inductivity Lq (phase) 11.8 mH
- Rotor position encoder for absolutely detectable revolutions 4096
- Rotor position sensor measuring principle Inductive
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Nominal operating voltage DC 565 V
- Phase-phase winding resistance 1.49 Ohm
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Relative air humidity 0 - 90 %
- Certification RCM compliance mark c UL us - Recognized (OL)
- Peak torque 30.5 Nm
- MTTFd, subcomponent 380 years, rotor position sensor
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Max. winding temperature 155 °C
- Rotor position encoder for DC operating voltage 5 V
- Number of pole pairs 5
- Electric time constant 15.8 ms
- Rotor position encoder system accuracy angle measurement -65 arcsec ... 65 arcsec
- Type code EMMT-AS
- Continuous stall current 6.7 A
- Rotor position sensor resolution 19 bit
- Winding inductance phase-phase 15.7 mH
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Brake holding torque 18 Nm
- Nominal torque 6.6 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Product weight 10100 g
- Electrical connection for input 1, connection pattern 00995913
- Mounting position Any
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Motor type as per EN 60034-7 IM B5 IM V3
- Certificate issuing authority UL E342973
- Brake airflow 0.73 A
- Brake coil resistance 24 Ohm
- Max. mechanical speed 13000 1/min
- Max. brake friction work 15000 J
- Brake separation time ≤ 80 ms
- Winding longitudinal inductivity Ld (phase) 8.7 mH
- Rotor position sensor interface EnDat® 22
- Nominal rotary speed 2700 1/min
- Motor nominal power 1870 W
- Rating class according to EN 60034-1 S1
- Thermal class according to EN 60034-1 F
- Stall torque 10.4 Nm
- Interface code, motor out 100A
- Brake closing time ≤ 40 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Rotor position encoder for positional values per revolution 524288
- Rotor position sensor Absolute encoder, multi-turn
- Max. rotational speed 3770 1/min
- Motor constants 1.54 Nm/A
- Motor nominal current 4.3 A
- Voltage constant, phase-to-phase 106 mVmin
- Storage temperature -20 °C ... 70 °C
- Total output inertia moment 8.06 kgcm²
- Brake mass moment of inertia 2.15 kgcm²
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 5255537 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
