3929312 Festo Positioners
Part#:3929312
Manufacturer:Festo
Alt. Part#:CMSX-P-S-C-U-F1-D-130-A
Product Lifecycle:Active
Get a quick Quote!
About the product: positioner CMSX-P-S-C-U-F1-D-130-A electropneumatic, for double-acting pneumatic quarter turn actuators, standard nominal flow rate 130 l/min, opening/closing regulating action safety function, 4-wire, power supply 24 VDC, setpoint input 0/4-20 mA, 0-10 V
About the manufacturer: Festo is one of the manufacturers that offers Positioners that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 3929312 Festo price in the box on the right side or send a quick quote.
3929312 Product Details
- Analog inputs, overload protection yes
- Approved cable diameter 7-13 mm for electrical connection 1
- Quick-coupling material High-alloy stainless steel
- Mode of operation Double-acting
- Analog outputs, reverse polarity protection yes
- Max. cable length 30 m for electrical connection 1
- Digital outputs, reverse polarity protection yes
- Digital inputs, reverse polarity protection yes
- Input characteristics As per IEC 61131-2, type 3
- Analog outputs, max. load resistance ≤ 600 Ohm
- Storage temperature -20 °C ... 60 °C
- Material of screws High-alloy stainless steel
- Analog inputs, resolution 16 bit
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 as per EN 60068-2-6
- Analog outputs, galvanic isolation no
- Relative air humidity 93 %
- Electrical connection 1, connection technology Screw terminal
- Inspection window material PC
- Analog outputs, overload protection yes
- Design digital, electropneumatic positioner
- Analog outputs, signal range 4 - 20 mA
- Electrical connection 1, tightening torque 0.6 Nm
- Electrical connection 1, conductor cross section < 1.5 mm²
- Setting options Via display and pushbuttons
- Certification RCM compliance mark
- Ambient temperature -5 °C ... 60 °C
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Note on materials RoHS-compliant
- Shaft material High-alloy stainless steel
- Analog inputs, galvanic isolation no
- Digital outputs, output current 100 mA
- Display 7-segment With backlighting
- Blanking plug material PA
- Digital outputs, short circuit current rating yes
- Analog inputs, linearity error at 25°C 0.5%
- Electrical connection 1, function 2x digital input Load power supply
- Digital outputs, overload protection yes
- Analog outputs, temperature coefficient < 0.02 %FS/K
- Type code CMSX
- Measuring principle of linear potentiometer Potentiometer
- DC operating voltage range 21.6 V ... 26.4 V
- Information on operating and pilot media Operation with oil lubrication not possible
- Type of mounting With accessories
- Pneumatic connection G1/8
- Switching input PNP NPN
- Electrical connection 1, connection type Terminal strip
- Switching output 3 x PNP or 3 x NPN switchable
- Analog outputs, short-circuit protection yes
- Dimensions W x L x H 190 mm x 105 mm x 130 mm
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 as per EN 60068-2-29
- Analog inputs, temperature coefficient < 0.02 %FS/K
- Nominal operating voltage DC 24 V
- Operating pressure 3 bar ... 8 bar
- Size of dead space 0.5 % ... 10 %
- Degree of protection IP65
- Product weight 970 g
- Housing material PC-reinforced
- Material for cable connector PA
- Analog outputs, resolution 12 bit
- Digital inputs, electrical isolation Yes, optocoupler
- Contamination level 3
- Mounting position Any
- Analog inputs, signal range 0 - 10 V 4 - 20 mA
- Digital outputs, potential separation Yes, optocoupler
- Analog outputs, linearity error at 25°C 0.5%
- Base plate material Wrought aluminum alloy Anodized
- Design features Safety position – pneumatic outlet 4 exhausted Safety position – pneumatic outlet 2 exhausted
- Max. current consumption 600 mA
- Electrical connection 1, number of pins/wires 14
- Reverse polarity protection for operating voltage connections
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Cable fitting M20 x 1.5 for electrical connection 1
- Standard nominal flow rate 130 l/min
- Seals material NBR
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 3929312 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
3929312
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
