LE550KC1QP Banner Electronic Components

Name: LE550KC1QP
Brand: Banner

Banner LE550KC1QP Triangulation class 1 Laser displacement sensor with triangulation system + LCD display + teach mode - Banner Engineering (L-GAGE series - LE) - Part #97766 - Sensing range 10cm...1m - Visible class 1 red Laser light (650nm) - 1 x digital output (PNP/NPN

Part#:LE550KC1QP

Manufacturer:Banner

Product Lifecycle:Active

Get a quick Quote!

Triangulation class 1 Laser displacement sensor with triangulation system + LCD display + teach mode - Banner Engineering (L-GAGE series - LE) - Part #97766 - Sensing range 10cm...1m - Visible class 1 red Laser light (650nm) - 1 x digital output (PNP/NPN

About the manufacturer: Banner is one of the manufacturers that offers Electronic Components that you can order at Quotebeam.com. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the LE550KC1QP Banner price in the box on the right side or send a quick quote.

Product Details

SSI
No
1-wire Serial Interface
No
Wireless
No
Profibus
No
RS-485
No
PROFINET
No
RS-422
No
RS-232
No
IO Link
Yes
Common Ethernet Protocol
No
Feature: Health/ Marginal Signal Output
Yes
Feature: Remote Teach
Yes
Feature: Chemical Resistant
No
Feature: Timing (Hold/Delay)
Yes
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Power/Current Consumption (exclusive of load)
70 mA @ 24 V dc
Max Off-state Leakage Current (µA)
PNP: <50 @ 30 V dc; Push/Pull: N/A
Max Ambient Light (Lux)
5000
Alarm Output (mA)
100
Laser Control
Yes

Discrete Output Hysteresis (mm)

Automatically adjusted

Remote Teach and Laser Control Input Impedence

10 kΩ min.

Minimum Window Size (mm)

Spot Size (@ Reference Distance)

4.9 mm x 12.1 mm @ 1 m

Minimum Response Time (ms)

Warm-up Time (minutes)

Window Material

Acrylic

Storage Temperature (°C)

-30 to 65

Max Op. Relative Humidity Non-Condensing (%)

90 at 55°C

Min Operating Temperature (°C)

-20

Max Operating Temperature (°C)

NEMA Rating

NEMA 6

IP Rating

IP67

Output Protection

Protected against continuous overload and short circuit

Discrete (Switched) Outputs

1 NPN/PNP Configurable; 1 PNP

Max Discrete (Switched) Output (mA)

100

Mechanical Shock

IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave

Vibration

MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).

Output Saturation Voltage PNP Outputs

<2 V

Number of Pins

Temperature Effect (mm/°C)

+/- 0.25 mm/°C from 100 to 600 mm, +/- 0.5 mm/°C at 1000 mm

Sensing Beam Wavelength (nm)

650

Adjustments

Push Button; Remote Teach

Delay at Power-up (ms)

3000

Max Sensing Distance (mm)

1000

Power Supply

12-30 V dc

Minimum Sensing Distance (mm)

100

Analog Resolution/Discrete Repeatability

100 mm to 600 mm: < 0.5; 600 mm to 1000 mm: < 1

Connection

Pigtail QD

Quick Disconnect Type

M12 (Euro)

Indicator

LCD; LED(s)

Input/Output

Discrete

Laser Classification

Class 1

Primary Housing Material

Zinc Alloy Die-Cast

Housing Style

Rectangular

Max Measurement Range

>500 mm - <=1000 mm

Sensing Mode (General)

Proximity

PC Configurable

Cable Length (m)

0.15

Device Type

Sensor

Power

Sensing Mode (Detailed)

Triangulation

Sensing Beam

Visible Red Laser

Primary brand

Banner Engineering

Supply voltage (DC)

12Vdc-30Vdc (24Vdc nom.)

Display

LCD 2 lines x 8 characters

Shape

Rectangular

Functions

Triangulation class 1 Laser displacement sensor green LED (power ON) yellow LED (analog output ON) yellow LED (discrete output ON)

Light Color

Visible class 1 red Laser

Material

Die-cast Zinc alloy housing Acrylic window

Main function

Sensor (Displacement)

Wavelength

650 nm

Ambient air temperature for operation

-20...+55 °C

Design

triangulation system LCD display teach mode

Product series / family name

L-GAGE series

Connection type

Pre-wired with 6" / 150mm pigtail terminated with 5-pin Euro-style M12 connector

Degree of protection

IP67 NEMA 6

Protection functions

Overload Short-circuit

Sub-range name

Sensing distance

10cm...1m

Communication protocol

IO-Link

Compliant with standard(s)

cULus CE

Digital outputs

1 x digital output (PNP/NPN transistor)

Order code / Manufacturer SKU

97766

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

Relevant products

LE550KQ

Verified stock: 0

Banner Engineering LE550KQ is a Class 2 laser displacement sensor, part of the LE series, designed with a triangulation system and an LCD display for easy configuration through TEACH mode. It emits a visible class 2 red laser with a wavelength of 650 nm for displacement measurement. The sensor is housed in a rectangular, die-cast zinc alloy body with an acrylic window, ensuring durability. It connects via a pre-equipped 5-pin Euro-style M12 connector and supports IO-Link communication protocol for versatile integration into automation systems. The LE550KQ operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55 °C. It offers a sensing distance from 10cm to 1m and includes one digital output (PNP/NPN transistor) for signal processing. Protection features include overload and short-circuit prevention, and it is rated with a degree of protection of IP67 and NEMA 6, making it suitable for challenging industrial environments.

Banner

LE550IC1 W/30

Verified stock: 0

Banner Engineering LE550IC1 W/30 is a Class 1 laser displacement sensor/transmitter belonging to the LE series. It features a triangulation system with an LCD display and TEACH mode for easy setup. The sensor emits a visible class 1 red laser with a wavelength of 650 nm for displacement measurement. It is designed with a rectangular shape and constructed from a die-cast zinc alloy housing with an acrylic window. This model is pre-wired with a 30ft / 9m cable terminated with bare end flying leads for connectivity. It offers protection against overload and short-circuit issues. The sensor operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc as the nominal voltage. It can function within an ambient air temperature range of -20 to +55 °C. The LE550IC1 W/30 is equipped with one analog output (4-20mA) and one digital output (PNP/NPN transistor), supporting a sensing distance from 10cm to 1m. It is rated with a degree of protection of IP67 and NEMA 6, indicating a high level of protection against dust and water ingress.

Banner

LE550DQ

Verified stock: 0

Banner Engineering LE550DQ is a Class 2 laser displacement sensor, part of the LE series, designed with a triangulation system and an LCD display for easy configuration through TEACH mode. It emits a visible class 2 red laser with a wavelength of 650 nm for displacement measurement. The sensor is housed in a rectangular, die-cast zinc alloy body with an acrylic window, ensuring durability. It comes pre-equipped with a 5-pin Euro-style M12 connector for straightforward installation. The LE550DQ operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55°C. It offers a sensing distance from 10cm to 1m and includes two digital outputs (PNP/NPN transistor) for versatile connectivity. Protection features include overload and short-circuit prevention, and it is rated with a degree of protection of IP67 and NEMA 6, signifying its robustness against dust and water ingress.

Banner

This item can ship within 24h!

LE550I

$848.40

Verified stock: 5

Banner Engineering LE550I is a Class 2 laser displacement sensor/transmitter designed for precise measurement tasks. It operates on a triangulation system and features an LCD display for easy setup and monitoring, along with a TEACH mode for simplified configuration. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection. It is housed in a durable die-cast zinc alloy with an acrylic window, ensuring robustness in various environments. The LE550I is pre-wired with a 6.5ft / 2m cable that terminates with bare end flying leads for flexible installation. It offers protection against overload and short-circuit conditions. The sensor requires a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can operate within an ambient air temperature range of -20 to +55 °C. It is rated with an IP67 and NEMA 6 degree of protection, making it suitable for use in demanding conditions. The LE550I provides one analog output (4-20mA) and one digital output (PNP/NPN transistor), accommodating a sensing distance from 10cm to 1m.

Banner

This item can ship within 24h!

LE550KC1Q

$848.40

Verified stock: 124

Banner Engineering LE550KC1Q is a Class 1 laser displacement sensor within the LE series, designed with a triangulation system and an LCD display for easy configuration through TEACH mode. It emits a visible class 1 red laser with a wavelength of 650 nm for displacement measurement. The sensor is housed in a rectangular, die-cast zinc alloy body with an acrylic window, ensuring durability. It comes pre-equipped with a 5-pin Euro-style M12 connector for connectivity and supports IO-Link communication protocol. The LE550KC1Q operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55 °C. It offers a sensing distance from 10cm to 1m and includes one digital output (PNP/NPN transistor). For protection, it features overload and short-circuit functions and is rated with a degree of protection of IP67 and NEMA 6, making it suitable for challenging industrial environments.

Banner

This item can ship within 24h!

LE550UQ

$824.16

Verified stock: 5

Banner Engineering LE550UQ is a Class 2 laser displacement sensor/transmitter designed for precise measurement tasks. It operates on a triangulation system and features an LCD display for easy setup and monitoring, along with a TEACH mode for simplified configuration. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection. It is housed in a durable die-cast zinc alloy with an acrylic window, ensuring robustness in various environments. The LE550UQ is equipped with a 5-pin Euro-style M12 connector for straightforward connectivity. It offers protection against overload and short-circuit conditions, ensuring stable operation. The sensor requires a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can operate within an ambient air temperature range of -20 to +55 °C. It is rated with an IP67 and NEMA 6 degree of protection, making it suitable for use in demanding conditions. The LE550UQ provides one analog output (0-10Vdc) and one digital output (PNP/NPN transistor), accommodating a variety of output requirements. Its sensing distance ranges from 10cm to 1m, allowing for flexible application across different measurement scenarios.

Banner