LE550IC1QP Banner Electronic Components

LE550IC1QP Product Details

• Profibus
  No
• 1-wire Serial Interface
  No
• Wireless
  No
• IO Link
  No
• RS-232
  No
• Common Ethernet Protocol
  No
• Feature: Timing (Hold/Delay)
  Yes
• Feature: Chemical Resistant
  No
• Feature: Remote Teach
  Yes
• Max Off-state Leakage Current (µA)
  NPN: < 200 at 30 V dc; PNP: < 10 at 30 V dc
• Analog Linearity (mm)
  Linearity is the lesser of Accuracy or 0.5% of full scale range (± 4.5 mm) at any given distance
• SSI
  No
• RS-485
  No
• RS-422
  No
• PROFINET
  No
• Feature: Health/ Marginal Signal Output
  Yes
• Supply Protection Circuitry
  Protected against reverse polarity and transient overvoltages
• Power/Current Consumption (exclusive of load)
  70 mA @ 24 V dc
• Max Ambient Light (Lux)
  5000
• Alarm Output (mA)
  100
Discrete Output Hysteresis (mm)
Automatically adjusted
Laser Control
Yes
Remote Teach and Laser Control Input Impedence
18 kΩ min. (65 kΩ min at 5 V dc)
Minimum Window Size (mm)
10
Spot Size (@ Reference Distance)
4.9 mm x 12.1 mm @ 1 m
Minimum Response Time (ms)
2
Warm-up Time (minutes)
10
Min Operating Temperature (°C)
-20
Window Material
Acrylic
Max Op. Relative Humidity Non-Condensing (%)
90 at 55°C
Storage Temperature (°C)
-30 to 65
Output Protection
Protected against continuous overload and short circuit
Max Operating Temperature (°C)
55
IP Rating
IP67
NEMA Rating
NEMA 6
Discrete (Switched) Outputs
1 NPN/PNP Configurable
Max Discrete (Switched) Output (mA)
100
Analog Current Output Rating
1 kΩ max @24 V dc, max load resistance = [(Vcc-4.5 V)/0.02 A] Ω
Output Saturation Voltage PNP Outputs
< 3 V at 100 mA
Delay at Power-up (ms)
2000
Output Saturation Voltage NPN Outputs
< 1.6 V at 100 mA
Minimum Sensing Distance (mm)
100
Power Supply
12-30 V dc
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Vibration
MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Sensing Beam Wavelength (nm)
650
Temperature Effect (mm/°C)
+/- 0.25 mm/°C from 100 to 600 mm, +/- 0.5 mm/°C at 1000 mm
Adjustments
Push Button; Remote Teach
Number of Pins
5
Analog Resolution/Discrete Repeatability
100 mm to 600 mm: < 0.5; 600 mm to 1000 mm: < 1
Max Sensing Distance (mm)
1000
Primary Housing Material
Zinc Alloy Die-Cast
Quick Disconnect Type
M12 (Euro)
Connection
Pigtail QD
Analog Output Configuration
4-20 mA
Laser Classification
Class 1
Indicator
LCD; LED(s)
Input/Output
Analog & Discrete
Power
DC
PC Configurable
No
Sensing Mode (Detailed)
Triangulation
Device Type
Sensor
Sensing Mode (General)
Proximity
Max Measurement Range
>500 mm - <=1000 mm
Housing Style
Rectangular
Sensing Beam
Visible Red Laser
Cable Length (m)
0.15

Product condition

Related documents LE550IC1QP Specs