Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

X67DS438A B&R Electronic Components

B&R X67DS438A X67 digital signal module, 4x IO-Link master V1.1, 4 digital channels configurable as inputs or outputs, 3-wire connections, NetTime function
B&R

Part#:X67DS438A

Manufacturer:B&R

Product Lifecycle:Active

Get a quick Quote!

X67 digital signal module, 4x IO-Link master V1.1, 4 digital channels configurable as inputs or outputs, 3-wire connections, NetTime function

Check out the X67DS438A B&R price in the box on the right side or send a quick quote.

Product Details

  • Weight200 g
  • Torque for connections M12
    Max. 0.6 Nm
  • Dimensions Depth
    42 mm
  • Relative humidity Transport
    5 to 95%
  • Dimensions Height
    85 mm
  • Torque for connections M8
    Max. 0.4 Nm
  • Relative humidity Storage
    5 to 95%
  • Relative humidity Operation
    5 to 95%
  • Temperature Transport
    -40 to 85°C
  • Dimensions Width
    53 mm
  • Switching threshold High
    >15 VDC
  • Temperature Storage
    -40 to 85°C
  • Switching threshold Low
    <5 VDC
  • Temperature Operation
    -25 to 60°C
  • Installation elevation above sea level 0 to 2000 m
    No limitation
  • Input filter Software
    Default 1 ms, configurable between 0 and 25.5 ms
  • Mounting orientation Any
    Yes
  • Switching delay 1 → 0
    <10 µs
  • Overload protection of C/Q output Overcurrent threshold
    Configurable using software
  • Installation elevation above sea level >2000 m
    Reduction of ambient temperature by 0.5°C per 100 m
  • Input filter Hardware
    300 ns
  • Overload protection of C/Q output Switch-off duration
    Configurable using software
  • Certifications EAC
    Yes
  • Overload protection Switch-off duration
    Configurable using software
  • Overload protection Switch-off delay
    Configurable using software
  • Limit values for COM3 Max. connection capacity
    22 nF (cable + IO-Link device)
  • Transfer rates COM3
    230.4 kbaud
  • Switching delay 0 → 1
    <10 µs
  • Transfer rates COM2
    38.4 kbaud
  • Transfer rates COM1
    4.8 kbaud
  • Cable specification Loop resistance
    Max. 6 Ω
  • Limit values for COM3 Max. load
    96 Ω / 250 mA
  • Certifications UL
    cULus E115267; Industrial control equipment
  • Power consumption Internal I/O
    0.5 W
  • Cable specification Line capacitance
    Max. 3 nF
  • Certifications HazLoc
    cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
  • Certifications UKCA
    Yes
  • Power consumption X2X Link power supply
    0.75 W
  • Certifications ATEX
    Zone 2, II 3G Ex nA IIA T5 Gc; IP67, Ta = 0 - Max. 60°C; TÜV 05 ATEX 7201X
  • Certifications CE
    Yes
  • Diagnostics Module run/error
    Yes, using LED status indicator and software
  • Cable specification Cable length
    Max. 20 m
  • Connection type Inputs
    M12, A-coded
  • Diagnostics C/Q status
    Yes, using LED status indicator and software
  • Diagnostics I/Q status
    Yes, using software
  • Diagnostics IO-Link operating state
    Yes, using LED status indicator and software
  • Connection type I/O power supply
    M8, 4-pin
  • Cable specification Cable type
    4-pin sensor cable, unshielded
  • Connection type X2X Link
    M12, B-coded
  • Electrical isolation
    Bus isolated from IO-Link
  • Degree of protection per EN 60529
    IP67
  • Input current at 24 VDC
    Typ. 4.0 mA
  • Insulation voltage between channel and bus
    500 Veff
  • Input voltage
    24 VDC -15% / +20%
  • Input circuit
    Sink
  • Input resistance
    Typ. 6 kΩ
  • Switching frequency (resistive load)
    Max. 500 Hz
  • Output circuit
    Sink or source
  • Total nominal current
    Max. 1 A
  • Output protection
    Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads
  • Nominal output current
    0.25 A
  • Peak short-circuit current
    <1.3 A
  • Bus level
    24 VDC (active), 0 VDC (resting voltage)
  • Short-circuit proof
    Yes
  • Insulation voltage between IO-Link and bus
    500 Veff
  • Voltage drop on semiconductor switch
    Max. 0.5 VDC at 0.25 A
  • Switching voltage
    I/O power supply minus voltage drop for short-circuit protection and semiconductor switch
  • Residual voltage
    <0.7 VDC at nominal current 0.25 A
  • Variant
    Bipolar, positive and negative switching
  • Data format
    1 start bit, 8 data bits, 1 parity bit (even), 1 stop bit
  • Integrated protection
    Reverse polarity protection
  • Voltage
    I/O power supply minus voltage drop for short-circuit protection
  • Voltage drop for short-circuit protection at 0.5 A
    Max. 0.3 V
  • B&R ID code
    0xCAAE
  • I/O module
    IO-Link master with 4 IO-Link interfaces
  • Status indicators
    IO-Link operating state, bus function, module status
  • Voltage range
    24 VDC ±25%
  • Nominal voltage
    24 VDC
  • Power consumption
    Max. 12 W per IO-Link interface

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of B&R

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

B&R Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo