Electrical Safety Devices

PILZ-751105

Pilz PILZ-751105 is a safety relay designed as a single-channel contact expansion module that features instantaneous contact expansion and ensures safe separation. It is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. This model has a net height of 100 mm, a net width of 17.5 mm, and a net depth of 120 mm, with a degree of protection rated at IP40. The PILZ-751105 is part of the PNOZ s7 sub-range and is housed in a PC material. It supports a supply voltage of 19.2-28.8Vdc (24Vdc nom.) and has a power consumption of 2 W. The safety output contacts are rated for 6A at 24Vdc (DC-1) or 240Vac (AC-1) and 5A at 24Vdc (DC-13) or 230Vac (AC-15). Connection is facilitated through plug-in/detachable spring terminal connections. Its operating modes include single-channel for single device operation, dual-channel for contact expansion for PNOZ s4 (Emergency stop) with detection of shorts across contacts, monitored start, and falling edge with feedback loop monitoring. The digital outputs consist of 4 x instantaneous safety outputs (4NO / 4xSPST-NO each made of 2 N.O. contacts in series; 6A 24Vdc DC-1 or 240Vac AC-1 resistive load) and 1 x instantaneous auxiliary output (1NC / SPST-NC made of 2 N.C. contacts in series). Additionally, it has 1 x digital input (24Vdc; 70mA).

Pilz

PILZ-750135

Pilz PILZ-750135 is a safety relay designed for single or dual-channel operation with capabilities for safety gate monitoring, instantaneous E-STOP monitoring, limit switch monitoring, and light beam device monitoring of type 2 (with or without test pulse) & type 4. It supports monitored manual reset, start-up testing, and self-test functions. This model is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55 °C. It has a net height of 98 mm, a rated current for safety output contacts of 6A at 24Vdc (DC-1), 6A at 240Vac (AC-1), 4A at 24Vdc (DC-13), and 3A at 230Vac (AC-15). Connection is facilitated through plug-in/detachable screw terminals, and it accepts a supply voltage range of 40.8-264Vac (with nominal voltages of 48Vac, 110Vac, 120Vac, 220Vac, 240Vac) and 40.8-264Vdc (with nominal voltages of 48Vdc, 110Vdc, 120Vdc, 220Vdc, 250Vdc). The PILZ-750135, part of the PNOZ s4 sub-range, measures 22.5mm in width, has an IP40 degree of protection, and consumes 2.5W of power. Its net depth is 120 mm, and the housing is made of PC material. The operating modes include options for single-channel operation without redundancy, dual-channel operation with or without detection of shorts across contacts, and various start modes (automatic, manual, monitored with falling or rising edge, and start with start-up test). It can increase the number of available instantaneous safety contacts by connecting to a PNOZsigma contact expansion module or external contactors/relays. The digital outputs include 3 x instantaneous safety outputs and 1 x instantaneous auxiliary output, plus 1 x auxiliary output (semiconductor output). It features 2 operating modes for protection functions and has 2 x digital inputs plus 1 x reset/start input.

Pilz

PILZ-750134

Pilz PILZ-750134 is a safety relay designed for single or dual-channel operation with capabilities for safety gate monitoring, instantaneous E-STOP monitoring, limit switch monitoring, and light beam device monitoring for both type 2 and type 4. It supports monitored manual reset, start-up testing, and self-test functions. This part is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +60 °C. It has a net height of 98 mm and is specifically designed for furnace safety valve applications. The safety output contacts are rated at 6A for 24Vdc (DC-1), 1.5A for 240Vac (AC-1), 0.4A for 24Vdc (DC-13), and 0.6A for 230Vac (AC-15). Connection is facilitated through plug-in/detachable screw terminals. The supply voltage can range from 40.8 to 264Vac, with nominal values including 48Vac, 110Vac, 120Vac, 220Vac, and 240Vac, and from 40.8 to 264Vdc, with nominal values of 48Vdc, 110Vdc, 120Vdc, 220Vdc, and 250Vdc. It belongs to the PNOZ s4.1 sub-range, with dimensions of W22.5mm x D120mm, and offers a degree of protection of IP40. The housing is made of PC material, and the net width is 22.5 mm. Power consumption is rated at 2.5 W. It features 3 x instantaneous safety outputs and 1 x instantaneous auxiliary output, plus 1 x auxiliary output (semiconductor output). It includes 2 operating modes for detecting shorts across contacts and has 2 x digital inputs and 1 x reset/start input.

Pilz

PILZ-750110

Pilz PILZ-750110 is a safety relay designed as a single-channel contact expansion module that features instantaneous contact expansion and ensures safe separation. It is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. This part has a net height of 98 mm, a width of 45 mm, and a depth of 120 mm, with a degree of protection rated at IP40. The safety output contacts are rated for 6A at 24Vdc (DC-1) and 240Vac (AC-1), and 5A at 24Vdc (DC-13) and 230Vac (AC-15). It offers plug-in/detachable screw terminal connections and belongs to the PNOZ s11 sub-range. The supply voltage requirement is 19.2-28.8Vdc (24Vdc nominal), and it consumes 3W of power. The housing is made of PC material. It supports dual-channel operation with a PNOZsigma base unit via a PNOZsigma connector and single-channel operation without a base unit, where a 1-input circuit affects the output relays. The digital outputs include 8 x instantaneous safety outputs (8NO) and 1 x instantaneous auxiliary output (1NC), alongside 1 x digital input (24Vdc; 95mA).

Pilz

PILZ-750103

Pilz PILZ-750103 is a safety relay designed for single or dual-channel operation with features including safety gate monitoring, instantaneous E-STOP monitoring, limit switch monitoring, and light beam device monitoring for both type 2 and type 4 devices. It supports monitored manual reset, start-up testing, and self-test functionalities. This part is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55 °C. It has a net height of 98 mm, a rated current for safety output contacts of 6A at 24Vdc (DC-1), 6A at 240Vac (AC-1), 5A at 24Vdc (DC-13), and 5A at 230Vac (AC-15). The connection type is plug-in/detachable screw terminals, belonging to the PNOZ s4 sub-range. Dimensions include a width of 22.5mm and a depth of 120 mm, with a degree of protection rated at IP40. The supply voltage requirement is 20.4-26.4Vdc (24Vdc nominal), housed in a PC material. Power consumption is rated at 2.5 W. It features 3 x instantaneous safety outputs and 1 x instantaneous auxiliary output, plus 1 x auxiliary output (semiconductor output), with 2 x digital inputs and 1 x reset/start input. The protection functions include two operating modes, with or without detection of shorts across contacts.

Pilz

PILZ-772010

Pilz PILZ-772010 is a communications unit designed as an expansion/communication module with Ethernet POWERLINK V2 fieldbus interface, functioning as a controlled node. It features potential isolation between the fieldbus and module voltage with functional insulation and a rated surge voltage of 500V. This unit is suitable for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with it. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 110.4 mm, and it connects via an RJ45 connector plug-in/detachable screw or spring-loaded terminals, supporting 2 points per spring-loaded connection with a 9mm stripping length. It belongs to the communication module sub-range, encased in a PC housing, and offers an IP20 degree of protection. The supply voltage ranges from 19.2 to 30Vdc, with a nominal 24Vdc, and an additional 3.23-3.37Vdc (3.3Vdc nominal) for module supply via the base unit. It supports a cross-section of 0.25 to 2.5mm2 for various connection types and consumes 1.2W power from the supply via the base unit, with an additional 0.2W for the module supply. The unit's power dissipation/losses are a maximum of 1.5W, operates with a speed of 100MBit/s for Ethernet POWERLINK V2, and has a current consumption of 60mA from the supply via the base module. It features a time delay of 20ms for supply interruption before de-energization and is designed for storage in ambient air temperatures ranging from -25 to +70°C. The unit includes protection functions such as galvanic isolation and potential isolation, with a rated insulation voltage (Ui) of 30 V.

Pilz

PILZ-773120

Pilz PILZ-773120 is a configurable safety base unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. This safety controller features an airgap creepage of 3mm between relay contacts and 5.5mm between relay contacts and other circuits. It offers potential isolation with protective separation, rated at 2500V between SC output and system voltage, and 6000V between relay output and system voltage. The unit is expandable for furnace/burner functions and supports a rated current of 6A for both 24Vdc (DC-1) and 240Vac (AC-1), with specific ratings for other operational modes. Connection options include plug-in/detachable screw or spring-loaded terminals, accommodating various wire sizes and types. The base unit has dimensions of 27mm in width, 94mm in height, and 121mm in depth, with a degree of protection rated at IP20. It requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) and is constructed from PPO and ABS materials. The PILZ-773120 supports RS-232 communication protocol, has a power consumption profile for different operational states, and offers multiple digital inputs and outputs with specific safety and standard configurations. It includes protection functions such as short-circuit proofing, potential and galvanic isolation, and features a range of response times for various operational parameters.

Pilz

PILZ-773125

Pilz PILZ-773125 is a safety controller designed as a configurable safety base unit or safe small controller. It features airgap creepage distances of 3mm between relay contacts and 5.5mm between relay contacts and other circuits. The unit supports 2 x Ethernet for communication and offers potential isolation with protective separation, having a rated surge voltage of 2500V between SC output and system voltage, and 6000V between relay output and system voltage. It is designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. The net height of the unit is 94mm, and it is expandable for furnace/burner function applications. The rated current specifications include 6A at 24Vdc (DC-1), 6A at 240Vac (AC-1), among others, with connection types accommodating plug-in/detachable screw or spring-loaded terminals. As part of the base unit sub-range, it measures 27mm in width and offers an IP20 degree of protection. The supply voltage requirement is 20.4-28.8Vdc (24Vdc nominal), constructed from PPO bottom housing and ABS front housing materials. It supports a maximum cable length of 1000m per input and 40km overall for test pulse output, with a net width of 135mm. Communication is facilitated via Ethernet, and it accepts various cross-sections for wiring. Power consumption varies with output external power supply up to 192W, with lower consumption for expansion modules and no load conditions. The net depth is 121mm, and it can be stored in temperatures ranging from -25 to +70°C. It features 4 x digital outputs for safety semiconductor outputs, additional outputs for standard auxiliary, safety relay, test pulse, and standard cascading functions. Protection functions include short-circuit proofing, potential isolation, and galvanic isolation. Response times range from 3s for simultaneity channel max to 0.5s for 2-hand circuit simultaneity, with a rated impulse voltage of 6kV and rated insulation voltage of 250V. It supports 20 x safety inputs, with a current consumption of 6A for blow-out fuse or circuit breaker. Time delays and processing times are specified for various operational parameters, ensuring precise control and safety measures.

Pilz

PILZ-773113

Pilz PILZ-773113 is a power supply unit designed for DIN rail mounting, specifically for horizontal placement on top of a hat rail. It operates within an ambient air temperature range of -10 to +55 °C and features screw terminal connections. This unit has a net height of 94 mm, a width of 45 mm, and a depth of 121 mm, encased in an ABS housing. It supports a supply voltage range of 100Vac-240Vac (including 120Vac, 208Vac, 220Vac, 230Vac) and 100Vdc-240Vdc (including 110Vdc, 120Vdc, 220Vdc nom.), with a rated current of 0.62A to 0.79A. The PILZ-773113, part of the PNOZ pps1p sub-range, offers a degree of protection rated at IP20. It has a power consumption of 30 VA, a rated power of 15W, and provides an output voltage of 19Vdc or 24Vdc.

Pilz

PILZ-772102

Pilz PILZ-772102 is a communications unit designed for Ethernet POWERLINK V2 integration, featuring a controlled node device type with galvanic isolation for enhanced operational integrity between the fieldbus and module voltage, ensuring functional insulation with a rated surge voltage of 500V. It is engineered for DIN rail mounting, compatible with a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with it. The unit has a net height of 101.4 mm, supports a maximum rated current of 50mA from an external power supply, and offers connectivity through an RJ45 interface or screw or spring-loaded terminal connections accommodating 2 points per connection with a 9mm stripping length. As part of the communication module sub-range, it measures 22.5 mm in width, 110.4 mm in depth, and is housed in a green PC material with an IP20 degree of protection. The supply voltage ranges from 19.2 to 30Vdc, with a nominal 24Vdc and an additional 3.3Vdc supplied via the base unit. It supports wire cross-sections from 0.25 to 2.5mm2 for single-core flexible wires with screw connections and slightly different specifications for other wire types. The power consumption is rated at 1.2 W from an external power supply and 0.2 W from the supply via the base unit, with a maximum power dissipation/loss of 1.5 W. The unit is designed for storage in environments ranging from -25 to +70°C, features a rated insulation voltage of 30 V for potential isolation, and facilitates a transmission rate of 100MBit/s, with a current consumption of 60mA from the supply via the base module.

Pilz

PILZ-773104

Pilz PILZ-773104 is a safety controller designed as a configurable safety base unit or safe small controller. It features airgap creepage distances of 3mm between relay contacts and 5.5mm between relay contacts and other circuits. The unit offers potential isolation with protective separation, having a rated surge voltage of 2500V between SC output and system voltage, and 6000V between relay output and system voltage. It supports DIN rail mounting (35mmx7.5mm; horizontal) and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C. The controller has a net height of 94mm, a rated current of 6A for both 24Vdc (DC-1) and 240Vac (AC-1), and lower ratings for other specific conditions. Connection types include plug-in/detachable screw or spring-loaded terminals with specified stripping lengths. It falls under the base unit sub-range, measures 27mm in width, and offers an IP20 degree of protection. The supply voltage requirement is 20.4-28.8Vdc, with a nominal 24Vdc. The housing is made of PPO and ABS materials. It supports a maximum cable length of 1000m per input and 40km overall for test pulse output, with a net width of 135mm. Communication is facilitated via RS-232 protocol. The controller accommodates various cross-sections for wiring, has a power consumption of 192W under load and 8W at no load, and a net depth of 121mm. It can be stored in temperatures ranging from -25 to +70°C. The device includes multiple digital outputs for safety, auxiliary, and relay functions, along with 20 safety inputs. It features short-circuit proof protection and potential isolation, with specific response times for different functions. The rated impulse voltage is 6kV, with a rated insulation voltage of 250V. Current consumption is specified at 6A, with detailed time delays for switch-off, switch-on, supply interruption, input delay, and input pulse suppression, alongside processing times for cycle and self-test durations.

Pilz

PILZ-773105

Pilz PILZ-773105 is a safety controller designed as a configurable safety base unit or safe small controller. It features airgap creepage distances of 3mm between relay contacts and 5.5mm between relay contacts and other circuits. The unit supports 2 x Ethernet for communication and offers potential isolation with protective separation, rated at 2500V between SC output and system voltage, and 6000V between relay output and system voltage. It is designed for DIN rail mounting (35mmx7.5mm; horizontal) and can operate in ambient air temperatures ranging from -25 to +60°C. The net height of the unit is 94mm, and it comes in a coated version that is expandable. It has a rated current of 6A at 24Vdc (DC-1), 4A at 24Vdc (DC-1 when t>50°C), 6A at 240Vac (AC-1), 4A at 240Vac (AC-1 when t>50°C), 3A at 24Vdc (DC-13; 6 cycles/min), and 3A at 230Vac (AC-15), with a residual current of 0.5mA at "0" signal and 2A at signal level "1". Connection types include plug-in/detachable screw or spring-loaded terminals with specified stripping lengths. The base unit has dimensions of W27mm, a degree of protection of IP20, and a supply voltage range of 20.4-28.8Vdc (24Vdc nom.). It is constructed with a PPO bottom housing and ABS front housing, supports a maximum cable length of 1000m per input and 40km overall for test pulse output, and has a net width of 135mm. The communication protocol is Ethernet, and it accommodates various cross-sections for wiring. Power consumption is detailed for output external power supply, expansion modules, and no load conditions. The net depth is 121mm, and it can be stored in ambient air temperatures of -25 to +70°C. It features 4 x digital outputs for safety semiconductor outputs, 1 x digital output for standard auxiliary semiconductor output, 2 x digital outputs for safety relay output, 4 x digital outputs for test pulse outputs, and 1 x digital output for standard cascading. Protection functions include short-circuit proofing, potential isolation, and galvanic isolation. Response times, rated impulse voltage, rated insulation voltage, digital inputs, current consumption, time delays, and processing times are specified to ensure precise operation and integration into safety systems.

Pilz

PILZ-772100

Pilz PILZ-772100 is a configurable safety base unit designed for DIN rail mounting, compatible with 35mmx7.5mm and 27mm DIN rails. It features a safety controller with an Ethernet interface, including 2 RJ45 connectors, and supports an automatic IP address setting of 169.254.60.1. The unit operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with it. The net dimensions are 101.4 mm in height, 45 mm in width, and 120.2 mm in depth. It is designed for expandability via USB memory and offers various connection types, including plug-in/detachable screw or spring-loaded terminals. The base unit, with an IP20 degree of protection, requires a supply voltage of 19.2-30Vdc, with a nominal 24Vdc, and is housed in a PC material. It supports a maximum cable length of 2000m for test pulse output and accommodates wire cross-sections ranging from 0.25 to 2.5mm2 for screw connections and 0.2 to 1.5mm2 for spring connections. The power consumption is 18.5 W under load and 3 W with no load, with a maximum power dissipation of 4.5 W. It features 4 digital outputs for test pulses, short-circuit protection, a response time of 0.5 s for simultaneity in the 2-hand circuit, and a processing time of 30 ms, with a maximum duration OFF time during self-test of 4 ms. The communication protocol is Ethernet, supporting speeds of 10MBit/s and 100MBit/s, and the ambient air temperature for storage ranges from -25 to +70°C.

Pilz

PILZ-784193

Pilz PILZ-784193 is a safety relay designed for single or dual-channel operation with capabilities for safety gate monitoring, instantaneous E-STOP monitoring, limit switch monitoring, and light beam device monitoring for both type 2 (with or without test pulse) and type 4. It supports monitored manual reset and start-up testing with AND input and OR input, including a self-test feature. This part is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55 °C. It has a net height of 101 mm, a rated current for safety output contacts of 6A at 24Vdc (DC-1), 6A at 240Vac (AC-1), 4A at 24Vdc (DC-13), and 3A at 230Vac (AC-15). Connection is facilitated through plug-in/detachable spring terminal connections. The PILZ-784193, part of the PNOZ e6.1p sub-range, measures 45mm in width and 121mm in depth, with a degree of protection rated at IP40. It operates on a supply voltage of 19.2-30Vdc (24Vdc nominal) and is constructed with a PPO housing and an ABS front housing. The operating modes include single-channel operation with input wiring in accordance with EN 60204, dual-channel operation with or without detection of shorts between the pushbutton contacts, automatic start, and monitored start. It features 4 x instantaneous safety outputs, 2 x instantaneous safety outputs (semiconductor outputs), 1 x instantaneous auxiliary output (semiconductor output), and 2 x test pulse outputs. Protection functions include 2 operating modes with or without detection of shorts across contacts. Digital inputs comprise 1 x digital input, 2 x logic inputs, 1 x feedback input, 1 x start input, and 1 x self-monitoring input.

Pilz

PILZ-784190

Pilz PILZ-784190 is a safety relay designed for single or dual-channel operation with capabilities for safety gate monitoring, instantaneous E-STOP monitoring, limit switch monitoring, and light beam device monitoring type 2 (with or without test pulse). It features a monitored manual reset, start-up testing with AND input and OR input, and a self-test function. This part is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. It has a net height of 101 mm, a rated current of 1.5A, and utilizes spring terminal connections. The PILZ-784190 belongs to the PNOZ e5.13p sub-range, measures 22.5mm in width, and has a net depth of 121 mm. It offers a degree of protection of IP40 and requires a supply voltage of 19.2-30Vdc (24Vdc nominal). The housing is made of PPO with an ABS front, ensuring compatibility with evaluation devices for safety sensors. Its operating mode includes dual-channel operation with a redundant input circuit, detection of earth faults in the input and start circuits, automatic start, and monitored start. The relay can increase the number of available contacts by connecting to contact expansion modules or external contactors/relays. It features 2 x instantaneous safety outputs and 2 x instantaneous auxiliary outputs, both semiconductor outputs (2SO), along with 1 x test pulse output. The protection functions include 2 operating modes (with or without detection of shorts across contacts), and it has digital inputs for enhanced functionality, including a digital input, a logic input, a feedback input, a start input, and a self-monitoring input.

Pilz

PILZ-784137

Pilz PILZ-784137 is a safety relay designed for single or dual-channel operation, capable of safety gate monitoring, including mechanical and non-contact methods. It features an ON-delay de-energization timer, monitored manual reset, and start-up testing capabilities that support both AND and OR input logic for enhanced safety measures. This unit is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. It has a net height of 101 mm, a rated current of 2A, and utilizes plug-in/detachable spring terminal connections. The PNOZ e3vp sub-range model comes with dimensions of W22.5mm x D121mm, offering an IP40 degree of protection. It requires a supply voltage of 19.2-30Vdc, with a nominal 24Vdc, and is constructed with a PPO housing and an ABS front housing. The net width and depth are 22.5 mm and 121 mm, respectively. Its operating modes include detection of earth faults in the input circuit and shorts between input circuit contacts. The unit features automatic and monitored start modes, with a start-up test to prevent automatic restarting after a power failure. It allows for an increase in the number of available contacts by connecting to contact expansion modules or external contactors/relays. The digital outputs include 1 x instantaneous auxiliary output, 1 x instantaneous safety output, 1 x delayed safety output with a selectable time delay up to 300 seconds, and 2 x test pulse outputs. It offers protection functions with two operating modes and includes digital inputs for comprehensive control and safety monitoring.

Pilz

PILZ-775830

Pilz PILZ-775830 is a safety relay designed for single or dual-channel operation with capabilities for safety gate monitoring, instantaneous E-STOP monitoring, and limit switch monitoring. It features DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. The device has a net height of 87 mm, and it supports a rated current for safety output contacts of 8A at 24Vdc (DC-1), 8A at 240Vac (AC-1), 7A at 24Vdc (DC-13), and 5A at 230Vac (AC-15). Connection is facilitated through fixed screw terminal connections, and it requires a supply voltage (AC) of 195.5-264Vac (230Vac / 240Vac nominal). Part of the PNOZ 1 sub-range, this safety relay measures 90mm in width and 121mm in depth, with a degree of protection rated at IP40. The housing is made of PPO with an ABS front, and it has a power consumption of 5.5 VA. Its operating modes include single-channel operation without redundancy, detecting earth faults in the start and input circuit, and dual-channel operation that does not detect shorts across contacts but includes redundant input circuits. The unit can automatically start once the input circuit is closed or manually start once both the input and start circuits are closed. It allows for an increase in the number of available contacts by connecting contact expansion modules or external contactors/relays. The device includes 3 x instantaneous safety outputs (3NO) and 1 x instantaneous auxiliary output (1NC), alongside 2 x digital inputs and 1 x feedback input, plus 1 x start input.

Pilz

PILZ-775695

Pilz PILZ-775695 is a safety relay designed for single-channel safety relay operations, including instantaneous E-STOP (Emergency stop) monitoring. It features DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. The device has a net height of 87 mm, with safety output contacts rated at 8A for both 24Vdc (DC-1) and 240Vac (AC-1), 7A for 24Vdc (DC-13), and 5A for 230Vac (AC-15). Connection is facilitated through fixed screw terminal connections. The supply voltage requirement is 93.5-121Vac (110Vac nominal) under the sub-range name PNOZ 2. Dimensions include a width of 90 mm and a depth of 121 mm, offering a degree of protection rated at IP40. The housing is made of PPO with an ABS front, and the unit consumes 5 VA of power. It operates in single-channel mode without redundancy in the input circuit, detecting earth faults in the start and input circuit. The unit can automatically start once the input circuit is closed or manually start once both the input and start circuits are closed. It allows for an increase in the number of available contacts by connecting contact expansion modules or external contactors/relays. Digital outputs include 3 x instantaneous safety outputs (3NO / 3xSPST-NO each made of 2 N.O. contacts in series; 8A 24Vdc DC-1 or 240Vac AC-1 resistive load) and 1 x instantaneous auxiliary output (1NC / SPST-NC made of 2 N.C. contacts in parallel). Digital inputs comprise 1 x digital input (24Vdc; 50mA), 1 x feedback input, and 1 x start input.

Pilz

PILZ-774725

Pilz PILZ-774725 is a safety relay designed for single or dual-channel operation with capabilities for safety gate monitoring, instantaneous E-STOP monitoring, limit switch monitoring, and monitored manual reset. It features DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. The device has a net height of 87 mm, a rated current for safety output contacts of 8A at 24Vdc (DC-1), 8A at 240Vac (AC-1), 7A at 24Vdc (DC-13), and 5A at 230Vac (AC-15), with fixed screw terminal connections. The supply voltage (AC) requirement is 195.5-264Vac (230Vac / 240Vac nom.), belonging to the PNOZ X6 sub-range. Dimensions include a width of 45mm and a depth of 121mm, with a degree of protection rated at IP40. The housing is made of PPO with an ABS front, and the power consumption is 6.5 VA. Operating modes include single-channel operation without redundancy, detecting earth faults in the start and input circuit, and dual-channel operation that does not detect shorts across contacts but includes redundant input circuits. It also features automatic, manual, and monitored start options. The relay has 3 x instantaneous safety outputs (3NO / 3xSPST each made of 2 N.O. and 1 N.C. contacts in series; 8A 24Vdc DC-1 or 240Vac AC-1 resistive load), 2 x digital inputs (24Vdc; 50mA), and 1 x start input, allowing for the connection of contact expansion modules or external contactors/relays to increase the number of available contacts.

Pilz

PILZ-774612

Pilz PILZ-774612 is a safety relay designed for single or dual-channel operation with functions including safety gate monitoring, instantaneous and delayed E-STOP monitoring, limit switch monitoring, and monitored manual reset. It is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. This model has a net height of 87 mm, a rated current for safety output contacts of 8A at 24Vdc (DC-1), 8A at 240Vac (AC-1), 7A at 24Vdc (DC-13), and 5A at 230Vac (AC-15), with fixed screw terminal connections. The supply voltage ranges from 20.4-264Vac (24Vac / 120Vac / 240Vac nom.) and 20.4-264Vdc (24Vdc / 110Vdc / 120Vdc / 220Vdc / 250Vdc nom.), belonging to the sub-range name PNOZ XV3.1. Dimensions are W90mm x D121mm, with a degree of protection of IP40. The housing is made of PPO with an ABS front, and the net width is 90 mm. Power consumption is 5 W. It features 3 x instantaneous safety outputs, 1 x instantaneous auxiliary output, and 2 x delayed safety outputs with a time-delay selectable between 0.3s to 300s. It includes 2 operating modes, 2 x digital inputs, 1 x start input, and 1 x reset input, supporting various operating modes including automatic, manual, and monitored start, with the capability to increase the number of available contacts through external modules.

Pilz