282-885

Wago 282-885 is a mounting accessory designed with a locking cover that mechanically locks multiple links. It features a net width for 5-poles (5P) configurations and is constructed from Polyamide (PA) 66. The power consumption characteristic of this part is described as transparent.

WAGO

770-885

Verified stock: 0

WAGO 770-885 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1, featuring a nominal voltage of 400V (III/3), a rated impulse voltage of 6kV (III/3), and a rated current of 25A, which adjusts to 20A for 4- and 5-pole loads. It adheres to overvoltage category III and pollution degree 3. For the US market, specific versions can be used for current interruption in select applications below 16A and up to 600V, as per UL 1977, which rates it for 600V and 23A. The part has approximately 1mΩ of contact resistance and 0.25mΩ contact transition plug/socket. It supports 5 total potentials, with a single level and a 5-pole connection. Physical specifications include a 10mm pin spacing, dimensions of 47mm in width, 29.5mm in height, 26mm height from the surface, and 14.6mm in depth, with solder pin length of 3.5mm and dimensions of 1 x 0.8mm. The drilled hole diameter with tolerance is 1.5 (-0.1...+0.1)mm. Designed for control technology, it features B coding, variable coding, and is marked 1 2 3 4 5 for potential identification. The mating force ranges from approximately 20 to 70N, with a locked retention force of >80N and an unmating force of approximately 20 to 70N, depending on the pole number, supporting up to 200 mating cycles without resistive load. It has a straight design, female connector/socket type for PCB connection, with mismating protection and a 90° mating direction to the PCB. The locking system includes a locking lever. PCB contacts are THT with 2 in-line solder pins per pole. The part is pink, made from Polyamide (PA66) with a V0 flammability class, Chrome-Nickel spring steel (CrNi) for the clamping spring, and copper or copper alloy for the contact material, tin-plated. It has a fire load of 0.195MJ and weighs 10.5g. It operates within a -5...+40°C processing temperature range and a -35...+85°C continuous operating temperature. It is RoHS compliant without exemption, packaged in boxes of 50 pieces, with a country of origin in Poland and a GTIN of 4050821458258.

WAGO

885-580

Verified stock: 0

Wago 885-580 is a mounting accessory designed as a clip to secure covers against slipping. It is made from Polyamide (PA) 66, ensuring compatibility and durability for its intended use. The color of the part is gray, aligning with a standard aesthetic for industrial components.

WAGO

885-110

Verified stock: 0

Wago 885-110 is a terminal designed for stud feed-through/thru terminal block applications, featuring a connection type of 1 x M10 stud bolt for mechanical lugs/bars. It has a rated current of 269A according to IEC standards and is designed as a 1-deck/level with lateral marking slots. The terminal's net height is rated at 8 kV for impulse voltage (Uimp), with dimensions of H67mm x W33.8mm x D66.7mm. It supports a net width for 1 feed-through pole (1P) and is mountable on a DIN-35 rail (35 x 15 / 35 x 7.5). The terminal is colored gray, constructed from Polyamide (PA) 66, and is designed to accommodate a cross-section with 1-wire (1 stud) connection. It is rated for a control voltage (AC) and has a power consumption specification, with a diameter compliant with an IEC rating of 1000 V.

WAGO

885-550

Verified stock: 0

Wago 885-550 is a partition designed to serve as a separator, partition, or barrier plate with a specific recess for a jumper bar. It features a rated impulse voltage (Uimp) of 2 mm and is constructed from Polyamide (PA) 66. The part is colored gray and has dimensions of H157mm x W2mm x D76.8mm.

WAGO

885-412

Verified stock: 0

Wago 885-412 is a busbar (comb) designed for assembled jumper bar applications. It features a 2-way design and is configured for 2-poles (2P) with a net width specification. The part is constructed with a power consumption attribute listed as silver, indicating the material or finish. Its dimensions are specified as H25mm x W54.2mm x D4mm, accommodating installations where space and precise measurements are critical.

WAGO

885-430

Verified stock: 0

Wago 885-430 is a busbar (comb) designed for electrical connectivity with a 3-way assembled jumper bar configuration. It features a net width accommodating 3-poles (3P) and is constructed with a power consumption attribute of silver. The dimensions of this part are H25mm x W88mm x D4mm, indicating its size for installation and integration into electrical systems.

WAGO

885-448

Verified stock: 0

Wago 885-448 is a busbar (comb) designed for step-down adjacent jumper bar applications. It features a 1-level design transitioning from M8 to M6. The part is constructed with silver, ensuring conductivity and durability. Its dimensions are H20mm x W35.2mm x D4mm, accommodating compact installation spaces.

WAGO

282-885

Verified stock: 0

Wago 282-885 is a mounting accessory designed with a locking cover that mechanically locks multiple links. It features a net width for 5-poles (5P) configurations and is constructed from Polyamide (PA) 66. The power consumption characteristic of this part is described as transparent.

WAGO

770-885

Verified stock: 0

WAGO 770-885 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1, featuring a nominal voltage of 400V (III/3), a rated impulse voltage of 6kV (III/3), and a rated current of 25A, which adjusts to 20A for 4- and 5-pole loads. It adheres to overvoltage category III and pollution degree 3. For the US market, specific versions can be used for current interruption in select applications below 16A and up to 600V, as per UL 1977, which rates it for 600V and 23A. The part has approximately 1mΩ of contact resistance and 0.25mΩ contact transition plug/socket. It supports 5 total potentials, with a single level and a 5-pole connection. Physical specifications include a 10mm pin spacing, dimensions of 47mm in width, 29.5mm in height, 26mm height from the surface, and 14.6mm in depth, with solder pin length of 3.5mm and dimensions of 1 x 0.8mm. The drilled hole diameter with tolerance is 1.5 (-0.1...+0.1)mm. Designed for control technology, it features B coding, variable coding, and is marked 1 2 3 4 5 for potential identification. The mating force ranges from approximately 20 to 70N, with a locked retention force of >80N and an unmating force of approximately 20 to 70N, depending on the pole number, supporting up to 200 mating cycles without resistive load. It has a straight design, female connector/socket type for PCB connection, with mismating protection and a 90° mating direction to the PCB. The locking system includes a locking lever. PCB contacts are THT with 2 in-line solder pins per pole. The part is pink, made from Polyamide (PA66) with a V0 flammability class, Chrome-Nickel spring steel (CrNi) for the clamping spring, and copper or copper alloy for the contact material, tin-plated. It has a fire load of 0.195MJ and weighs 10.5g. It operates within a -5...+40°C processing temperature range and a -35...+85°C continuous operating temperature. It is RoHS compliant without exemption, packaged in boxes of 50 pieces, with a country of origin in Poland and a GTIN of 4050821458258.

WAGO

885-580

Verified stock: 0

Wago 885-580 is a mounting accessory designed as a clip to secure covers against slipping. It is made from Polyamide (PA) 66, ensuring compatibility and durability for its intended use. The color of the part is gray, aligning with a standard aesthetic for industrial components.

WAGO

885-110

Verified stock: 0

Wago 885-110 is a terminal designed for stud feed-through/thru terminal block applications, featuring a connection type of 1 x M10 stud bolt for mechanical lugs/bars. It has a rated current of 269A according to IEC standards and is designed as a 1-deck/level with lateral marking slots. The terminal's net height is rated at 8 kV for impulse voltage (Uimp), with dimensions of H67mm x W33.8mm x D66.7mm. It supports a net width for 1 feed-through pole (1P) and is mountable on a DIN-35 rail (35 x 15 / 35 x 7.5). The terminal is colored gray, constructed from Polyamide (PA) 66, and is designed to accommodate a cross-section with 1-wire (1 stud) connection. It is rated for a control voltage (AC) and has a power consumption specification, with a diameter compliant with an IEC rating of 1000 V.

WAGO

885-550

Verified stock: 0

Wago 885-550 is a partition designed to serve as a separator, partition, or barrier plate with a specific recess for a jumper bar. It features a rated impulse voltage (Uimp) of 2 mm and is constructed from Polyamide (PA) 66. The part is colored gray and has dimensions of H157mm x W2mm x D76.8mm.

WAGO

885-412

Verified stock: 0

Wago 885-412 is a busbar (comb) designed for assembled jumper bar applications. It features a 2-way design and is configured for 2-poles (2P) with a net width specification. The part is constructed with a power consumption attribute listed as silver, indicating the material or finish. Its dimensions are specified as H25mm x W54.2mm x D4mm, accommodating installations where space and precise measurements are critical.

WAGO

885-430

Verified stock: 0

Wago 885-430 is a busbar (comb) designed for electrical connectivity with a 3-way assembled jumper bar configuration. It features a net width accommodating 3-poles (3P) and is constructed with a power consumption attribute of silver. The dimensions of this part are H25mm x W88mm x D4mm, indicating its size for installation and integration into electrical systems.

WAGO

885-448

Verified stock: 0

Wago 885-448 is a busbar (comb) designed for step-down adjacent jumper bar applications. It features a 1-level design transitioning from M8 to M6. The part is constructed with silver, ensuring conductivity and durability. Its dimensions are H20mm x W35.2mm x D4mm, accommodating compact installation spaces.

WAGO

282-885

Verified stock: 0

Wago 282-885 is a mounting accessory designed with a locking cover that mechanically locks multiple links. It features a net width for 5-poles (5P) configurations and is constructed from Polyamide (PA) 66. The power consumption characteristic of this part is described as transparent.

WAGO

770-885

Verified stock: 0

WAGO 770-885 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1, featuring a nominal voltage of 400V (III/3), a rated impulse voltage of 6kV (III/3), and a rated current of 25A, which adjusts to 20A for 4- and 5-pole loads. It adheres to overvoltage category III and pollution degree 3. For the US market, specific versions can be used for current interruption in select applications below 16A and up to 600V, as per UL 1977, which rates it for 600V and 23A. The part has approximately 1mΩ of contact resistance and 0.25mΩ contact transition plug/socket. It supports 5 total potentials, with a single level and a 5-pole connection. Physical specifications include a 10mm pin spacing, dimensions of 47mm in width, 29.5mm in height, 26mm height from the surface, and 14.6mm in depth, with solder pin length of 3.5mm and dimensions of 1 x 0.8mm. The drilled hole diameter with tolerance is 1.5 (-0.1...+0.1)mm. Designed for control technology, it features B coding, variable coding, and is marked 1 2 3 4 5 for potential identification. The mating force ranges from approximately 20 to 70N, with a locked retention force of >80N and an unmating force of approximately 20 to 70N, depending on the pole number, supporting up to 200 mating cycles without resistive load. It has a straight design, female connector/socket type for PCB connection, with mismating protection and a 90° mating direction to the PCB. The locking system includes a locking lever. PCB contacts are THT with 2 in-line solder pins per pole. The part is pink, made from Polyamide (PA66) with a V0 flammability class, Chrome-Nickel spring steel (CrNi) for the clamping spring, and copper or copper alloy for the contact material, tin-plated. It has a fire load of 0.195MJ and weighs 10.5g. It operates within a -5...+40°C processing temperature range and a -35...+85°C continuous operating temperature. It is RoHS compliant without exemption, packaged in boxes of 50 pieces, with a country of origin in Poland and a GTIN of 4050821458258.

WAGO

885-580

Verified stock: 0

Wago 885-580 is a mounting accessory designed as a clip to secure covers against slipping. It is made from Polyamide (PA) 66, ensuring compatibility and durability for its intended use. The color of the part is gray, aligning with a standard aesthetic for industrial components.

WAGO

885-110

Verified stock: 0

Wago 885-110 is a terminal designed for stud feed-through/thru terminal block applications, featuring a connection type of 1 x M10 stud bolt for mechanical lugs/bars. It has a rated current of 269A according to IEC standards and is designed as a 1-deck/level with lateral marking slots. The terminal's net height is rated at 8 kV for impulse voltage (Uimp), with dimensions of H67mm x W33.8mm x D66.7mm. It supports a net width for 1 feed-through pole (1P) and is mountable on a DIN-35 rail (35 x 15 / 35 x 7.5). The terminal is colored gray, constructed from Polyamide (PA) 66, and is designed to accommodate a cross-section with 1-wire (1 stud) connection. It is rated for a control voltage (AC) and has a power consumption specification, with a diameter compliant with an IEC rating of 1000 V.

WAGO

885-506 WAGO Automation components

Part#:885-506

Manufacturer:WAGO

Product condition

We're always improving how we show product data for you! 🙌

Relevant products

282-885

770-885

885-580

885-110

885-550

885-412

885-430

885-448

282-885

770-885

885-580

885-110

885-550

885-412

885-430

885-448

282-885

770-885

885-580

885-110

We are a proud member of: