Nikki Gonzales

Nick Goetz

Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

885-110 WAGO Automation components

WAGO 885-110 Wago 885-110 is a terminal designed for stud feed-through/thru terminal block applications, featuring a connection type of 1 x M10 stud bolt for mechanical lugs/bars. It has a rated current of 269A according to IEC standards and is designed as a 1-deck/level with lateral marking slots. The terminal's net height is rated at 8 kV for impulse voltage (Uimp), with dimensions of H67mm x W33.8mm x D66.7mm. It supports a net width for 1 feed-through pole (1P) and is mountable on a DIN-35 rail (35 x 15 / 35 x 7.5). The terminal is colored gray, constructed from Polyamide (PA) 66, and is designed to accommodate a cross-section with 1-wire (1 stud) connection. It is rated for a control voltage (AC) and has a power consumption specification, with a diameter compliant with an IEC rating of 1000 V.

WAGO

Part#:885-110

Manufacturer:WAGO

Product Lifecycle:Active

Get a quick Quote!

About the product: Wago 885-110 is a terminal designed for stud feed-through/thru terminal block applications, featuring a connection type of 1 x M10 stud bolt for mechanical lugs/bars. It has a rated current of 269A according to IEC standards and is designed as a 1-deck/level with lateral marking slots. The terminal's net height is rated at 8 kV for impulse voltage (Uimp), with dimensions of H67mm x W33.8mm x D66.7mm. It supports a net width for 1 feed-through pole (1P) and is mountable on a DIN-35 rail (35 x 15 / 35 x 7.5). The terminal is colored gray, constructed from Polyamide (PA) 66, and is designed to accommodate a cross-section with 1-wire (1 stud) connection. It is rated for a control voltage (AC) and has a power consumption specification, with a diameter compliant with an IEC rating of 1000 V.

Check out the 885-110 WAGO price in the box on the right side or send a quick quote.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

We're always improving how we show product data for you! 🙌

We are here to help.

If you need additional product info, just start the conversation below.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

885-110

Select Qty:

Average response time: 11 minutes

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

885-430 Part Image. Manufactured by WAGO.

885-430

Verified stock: 0

Wago 885-430 is a busbar (comb) designed for electrical connectivity with a 3-way assembled jumper bar configuration. It features a net width accommodating 3-poles (3P) and is constructed with a power consumption attribute of silver. The dimensions of this part are H25mm x W88mm x D4mm, indicating its size for installation and integration into electrical systems.

WAGO

770-885 Part Image. Manufactured by WAGO.

770-885

Verified stock: 0

WAGO 770-885 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1, featuring a nominal voltage of 400V (III/3), a rated impulse voltage of 6kV (III/3), and a rated current of 25A, which adjusts to 20A for 4- and 5-pole loads. It adheres to overvoltage category III and pollution degree 3. For the US market, specific versions can be used for current interruption in select applications below 16A and up to 600V, as per UL 1977, which rates it for 600V and 23A. The part has approximately 1mΩ of contact resistance and 0.25mΩ contact transition plug/socket. It supports 5 total potentials, with a single level and a 5-pole connection. Physical specifications include a 10mm pin spacing, dimensions of 47mm in width, 29.5mm in height, 26mm height from the surface, and 14.6mm in depth, with solder pin length of 3.5mm and dimensions of 1 x 0.8mm. The drilled hole diameter with tolerance is 1.5 (-0.1...+0.1)mm. Designed for control technology, it features B coding, variable coding, and is marked 1 2 3 4 5 for potential identification. The mating force ranges from approximately 20 to 70N, with a locked retention force of >80N and an unmating force of approximately 20 to 70N, depending on the pole number, supporting up to 200 mating cycles without resistive load. It has a straight design, female connector/socket type for PCB connection, with mismating protection and a 90° mating direction to the PCB. The locking system includes a locking lever. PCB contacts are THT with 2 in-line solder pins per pole. The part is pink, made from Polyamide (PA66) with a V0 flammability class, Chrome-Nickel spring steel (CrNi) for the clamping spring, and copper or copper alloy for the contact material, tin-plated. It has a fire load of 0.195MJ and weighs 10.5g. It operates within a -5...+40°C processing temperature range and a -35...+85°C continuous operating temperature. It is RoHS compliant without exemption, packaged in boxes of 50 pieces, with a country of origin in Poland and a GTIN of 4050821458258.

WAGO

885-426 Part Image. Manufactured by WAGO.

885-426

Verified stock: 0

Wago 885-426 is a busbar (comb) designed for electrical connectivity with a 3-way assembled jumper bar configuration. It features a net width accommodating 3-poles (3P) and is constructed with a power consumption attribute noted as silver. The dimensions of this part are specified as H15mm x W48mm x D4mm, indicating its height, width, and depth respectively.

WAGO

885-550 Part Image. Manufactured by WAGO.

885-550

Verified stock: 0

Wago 885-550 is a partition designed to serve as a separator, partition, or barrier plate with a specific recess for a jumper bar. It features a rated impulse voltage (Uimp) of 2 mm and is constructed from Polyamide (PA) 66. The part is colored gray and has dimensions of H157mm x W2mm x D76.8mm.

WAGO

885-412 Part Image. Manufactured by WAGO.

885-412

Verified stock: 0

Wago 885-412 is a busbar (comb) designed for assembled jumper bar applications. It features a 2-way design and is configured for 2-poles (2P) with a net width specification. The part is constructed with a power consumption attribute listed as silver, indicating the material or finish. Its dimensions are specified as H25mm x W54.2mm x D4mm, accommodating installations where space and precise measurements are critical.

WAGO

885-546 Part Image. Manufactured by WAGO.

885-546

Verified stock: 0

Wago 885-546 is a partition designed to serve as a separator, partition, or barrier plate with a specific recess for a jumper bar. It features a rated impulse voltage (Uimp) of 2 mm and is constructed from Polyamide (PA) 66, ensuring compatibility with various electrical setups. The part is colored gray and has dimensions of H102.3mm x W2mm x D58.8mm, fitting seamlessly into the designated equipment or system.

WAGO

885-430 Part Image. Manufactured by WAGO.

885-430

Verified stock: 0

Wago 885-430 is a busbar (comb) designed for electrical connectivity with a 3-way assembled jumper bar configuration. It features a net width accommodating 3-poles (3P) and is constructed with a power consumption attribute of silver. The dimensions of this part are H25mm x W88mm x D4mm, indicating its size for installation and integration into electrical systems.

WAGO

770-885 Part Image. Manufactured by WAGO.

770-885

Verified stock: 0

WAGO 770-885 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1, featuring a nominal voltage of 400V (III/3), a rated impulse voltage of 6kV (III/3), and a rated current of 25A, which adjusts to 20A for 4- and 5-pole loads. It adheres to overvoltage category III and pollution degree 3. For the US market, specific versions can be used for current interruption in select applications below 16A and up to 600V, as per UL 1977, which rates it for 600V and 23A. The part has approximately 1mΩ of contact resistance and 0.25mΩ contact transition plug/socket. It supports 5 total potentials, with a single level and a 5-pole connection. Physical specifications include a 10mm pin spacing, dimensions of 47mm in width, 29.5mm in height, 26mm height from the surface, and 14.6mm in depth, with solder pin length of 3.5mm and dimensions of 1 x 0.8mm. The drilled hole diameter with tolerance is 1.5 (-0.1...+0.1)mm. Designed for control technology, it features B coding, variable coding, and is marked 1 2 3 4 5 for potential identification. The mating force ranges from approximately 20 to 70N, with a locked retention force of >80N and an unmating force of approximately 20 to 70N, depending on the pole number, supporting up to 200 mating cycles without resistive load. It has a straight design, female connector/socket type for PCB connection, with mismating protection and a 90° mating direction to the PCB. The locking system includes a locking lever. PCB contacts are THT with 2 in-line solder pins per pole. The part is pink, made from Polyamide (PA66) with a V0 flammability class, Chrome-Nickel spring steel (CrNi) for the clamping spring, and copper or copper alloy for the contact material, tin-plated. It has a fire load of 0.195MJ and weighs 10.5g. It operates within a -5...+40°C processing temperature range and a -35...+85°C continuous operating temperature. It is RoHS compliant without exemption, packaged in boxes of 50 pieces, with a country of origin in Poland and a GTIN of 4050821458258.

WAGO

885-412 Part Image. Manufactured by WAGO.

885-412

Verified stock: 0

Wago 885-412 is a busbar (comb) designed for assembled jumper bar applications. It features a 2-way design and is configured for 2-poles (2P) with a net width specification. The part is constructed with a power consumption attribute listed as silver, indicating the material or finish. Its dimensions are specified as H25mm x W54.2mm x D4mm, accommodating installations where space and precise measurements are critical.

WAGO

885-546 Part Image. Manufactured by WAGO.

885-546

Verified stock: 0

Wago 885-546 is a partition designed to serve as a separator, partition, or barrier plate with a specific recess for a jumper bar. It features a rated impulse voltage (Uimp) of 2 mm and is constructed from Polyamide (PA) 66, ensuring compatibility with various electrical setups. The part is colored gray and has dimensions of H102.3mm x W2mm x D58.8mm, fitting seamlessly into the designated equipment or system.

WAGO

885-430 Part Image. Manufactured by WAGO.

885-430

Verified stock: 0

Wago 885-430 is a busbar (comb) designed for electrical connectivity with a 3-way assembled jumper bar configuration. It features a net width accommodating 3-poles (3P) and is constructed with a power consumption attribute of silver. The dimensions of this part are H25mm x W88mm x D4mm, indicating its size for installation and integration into electrical systems.

WAGO

770-885 Part Image. Manufactured by WAGO.

770-885

Verified stock: 0

WAGO 770-885 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1, featuring a nominal voltage of 400V (III/3), a rated impulse voltage of 6kV (III/3), and a rated current of 25A, which adjusts to 20A for 4- and 5-pole loads. It adheres to overvoltage category III and pollution degree 3. For the US market, specific versions can be used for current interruption in select applications below 16A and up to 600V, as per UL 1977, which rates it for 600V and 23A. The part has approximately 1mΩ of contact resistance and 0.25mΩ contact transition plug/socket. It supports 5 total potentials, with a single level and a 5-pole connection. Physical specifications include a 10mm pin spacing, dimensions of 47mm in width, 29.5mm in height, 26mm height from the surface, and 14.6mm in depth, with solder pin length of 3.5mm and dimensions of 1 x 0.8mm. The drilled hole diameter with tolerance is 1.5 (-0.1...+0.1)mm. Designed for control technology, it features B coding, variable coding, and is marked 1 2 3 4 5 for potential identification. The mating force ranges from approximately 20 to 70N, with a locked retention force of >80N and an unmating force of approximately 20 to 70N, depending on the pole number, supporting up to 200 mating cycles without resistive load. It has a straight design, female connector/socket type for PCB connection, with mismating protection and a 90° mating direction to the PCB. The locking system includes a locking lever. PCB contacts are THT with 2 in-line solder pins per pole. The part is pink, made from Polyamide (PA66) with a V0 flammability class, Chrome-Nickel spring steel (CrNi) for the clamping spring, and copper or copper alloy for the contact material, tin-plated. It has a fire load of 0.195MJ and weighs 10.5g. It operates within a -5...+40°C processing temperature range and a -35...+85°C continuous operating temperature. It is RoHS compliant without exemption, packaged in boxes of 50 pieces, with a country of origin in Poland and a GTIN of 4050821458258.

WAGO

Do you have questions?

We’re here for you ✨

We are a proud member of: