SI3.5-K10-AP6X Turck Inductive Sensors

Name: SI3.5-K10-AP6X
Brand: Turck

Turck SI3.5-K10-AP6X Inductive Sensor, Slot-type, Cable length (L) 0.5 m, Slot sensor, height 10 mm, Plastic, PBT‐GF30‐V0, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Part#:SI3.5-K10-AP6X

Manufacturer:Turck

Alt. Part#:1650001

Product Lifecycle:Active

Get a quick Quote!

Inductive Sensor, Slot-type, Cable length (L) 0.5 m, Slot sensor, height 10 mm, Plastic, PBT‐GF30‐V0, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

About the manufacturer: Turck is one of the manufacturers that offers Inductive Sensors that you can order at Quotebeam.com. Turck is a leading provider of sensor, fieldbus, and connectivity technologies, along with interface technology, human-machine interfaces (HMI), and RFID systems. We offer innovative solutions for factory and process automation requirements, guaranteeing top-notch performance.

Check out the SI3.5-K10-AP6X Turck price in the box on the right side or send a quick quote.

Product Details

Weight17 g
RoHSYes
Country Of OriginCHE
HTS Code8536507000
Ambient temperature
-25…+70 °C
Electrical connection
Cable
Protection class
IP67
Output function
NO contact, PNP
Design
Slot sensor
Cable length (L)
0.50 m
Slot width
3.5 mm
Construction size
19 x 15 x 10 mm, K10
Housing material
Plastic, PBT-GF30-V0
Operating voltage
10…30 VDC

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

SI3.5-K10-AP6X Description

Turck SI3.5-K10-AP6X is an inductive proximity slot sensor/switch belonging to the SI...-K10 series. It features a PBT-GF30-V0 (glass fiber reinforced Polybutylene Terephthalate) housing and sensing face, along with a PVC cable jacket. This sensor is pre-wired with a 2m / 6.5ft cable terminated with bare end flying leads for connectivity. It operates on a supply voltage of 10-30Vdc, including nominal values of 12Vdc and 24Vdc, and can function within an ambient air temperature range of -25°C to +70°C. The SI3.5-K10-AP6X is designed with a 15mm thick rectangular body that includes a 3.5mm passageway, ensuring a degree of protection rated at IP67. It offers one digital output (10-30Vdc; PNP; 200mA max.) with a sensing distance of 3.5mm and a no-load current consumption of 15mA. The maximum switching frequency is 2kHz / 2000Hz, and it includes protection functions against short-circuit (pulsed), overload, and reverse polarity. The response time is 8ms / 0.008 s, and it operates in a Normally Open (NO) mode. The control circuit is rated for a current of 200mA / 0.2 A.

Relevant products

NI15-G28-Y1

Verified stock: 0

Inductive Sensor, Rated switching distance 15 mm, Cable length (L) 2 m, Non-flush, Threaded barrel, PG21, Chrome-plated brass, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection, ATEX category II 2 G, Ex zone 1, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Turck

$32.07

Verified stock: 391

Capacitive Sensor, Rated switching distance 15 mm, Cable length (L) 2 m, Flush, M30 × 1.5 threaded barrel, Plastic, PA12‐GF30, Fine adjustment via potentiometer, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection, ATEX category II 2 G, Ex zone 1, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Turck

IM1-121EX-R

Verified stock: 0

Isolating switching amplifier, 1-channel, , 2 relay outputs (NO), Output mode adjustable (NO/NC mode), Common alarm output, Input circuits monitored for wire-break/short-circuit (ON/OFF switchable), SIL 2, Complete galvanic isolation, Input reverse-polarity protected, ATEX, IECEx, cUL, cFM, CSA, TR CU, NEPSI, KOSHA, TIIS, CCOE, INMETRO, Installation in zone 2

Turck

NI10-P18SK-Y1X

Verified stock: 0

Inductive Sensor, Rated switching distance 10 mm, Non-flush, Threaded barrel, M18 x 1, Plastic, PA12‐GF30-V0, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Terminal chamber, ATEX category II 2 G, Ex zone 1, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Turck

NI14-G18-Y1X

Verified stock: 0

Inductive Sensor, Rated switching distance 14 mm, Cable length (L) 2 m, Non-flush, Threaded barrel, M18 x 1, Chrome-plated brass, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Turck