PS016V-503-2UPN8X-H1141 Turck Pressure Sensors

Turck PS016V-503-2UPN8X-H1141 is a sensor designed for pressure measurement with instrumentation programmable compound pressure sensor capabilities. It features a set point range of 1-100% and a reset point range of 0.5-99.5%, with measurement units available in bar, psi, kPa, MPa, and miscellaneous options. The sensor operates within an ambient air temperature range of -40°C to +80°C and is equipped with a 2" tri-clamp sanitary diaphragm seal and a rotatable housing. The diameter of the sensor is 34mm, and it comes pre-equipped with a 4-pin M12 Eurofast QD male connector and a 1/4" NPT threaded male process port. As part of the PS500 series, it offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's cylindrical body is made from 1.4305 (303) stainless steel, including the housing, wetted parts, and pressure connection, with a ceramics Al2O3 pressure transducer. It can measure pressure ranges from -1 to +16bar (-14.5 to +232psi) and supports the IO-Link communication protocol. The fluid medium temperature range is -40°C to +85°C, and the operating mode can be programmed as NO (Normally Open) or NC (Normally Closed). It includes protection functions against short-circuit (pulsed) and reverse polarity, with a response time of 50 - 600ms. The sensor features 1 x analog output (4-20mA; can also be used as a NPN/PNP digital output), with set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, a response time of <3ms, repeatability of ≤0.5% of the measuring range, and zero shift/span shift of ≤0.15% of the measuring range per °C. The current consumption is 50mA, and it has an adjustable time delay for ON-delay and OFF-delay of 0-50.