Name: FTCI-N3/4D19A4P-2LIX-H1140/D224
Brand: Turck

FTCI-3/8D10A4P-LI-UP8X-H1141

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, DC 4-wire, 21.6…26.4 VDC, NO/NC prog., PNP output, 4…20 mA analog output, Analog output provides a current signal proportional to the flow rate for the overall operating range, Plug-in device, M12 x 1

Turck

FTCI-3/4D15A4P-4UP8X-H1160

Verified stock: 0

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, DC 6-wire, PNP outputs, NO/NC programmable

Turck

FTCI-3/8D10A4P-2LIX-H1141

Verified stock: 0

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, Output flow 4…20 mA, linear, Output temperature 4…20 mA, linear, DC 4-wire, 21.6…26.4 VDC, 4…20 mA analog output, Plug-in device, M12 x 1

Turck

FCI-D10A4P-LIX-H1141/A

Verified stock: 0

Turck FCI-D10A4P-LIX-H1141/A is a sensor designed for flow monitoring and transmission in gaseous media. It features a PBT (Polybutylene Terephthalate) housing, stainless steel 316Ti tubing, and a stainless steel 303 connector, ensuring durability and compatibility with various environments. The sensor operates within an ambient air temperature range of -20°C to +70°C and offers a single analog output (4-20mA; linear) for precise data transmission. With a degree of protection rated at IP65, it is safeguarded against dust ingress and low-pressure water jets from any direction. The response time ranges from 10-30 seconds upon startup and narrows to 1-20 seconds during normal operation, facilitating timely flow measurements. Its rectangular body is designed for inline flow monitoring of gaseous media, capable of detecting flow rates between 50cm/s and 40m/s. The sensor is part of the FCI series and comes pre-equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" with 1/4" BSPP threaded male process port, supporting a 10mm inline diameter. It can withstand pressures up to 20bar (290psi) and is powered by a supply voltage of 21.6-26.4Vdc (24Vdc nominal). The medium temperature range mirrors the ambient air temperature range, accommodating -20°C to +70°C.

Turck

FCI-TCD04A4P-AP8X-H1141/D077

Verified stock: 0

Turck FCI-TCD04A4P-AP8X-H1141/D077 is a sensor designed for flow monitoring with a PBT (Polybutylene Terephthalate) housing, stainless steel 316Ti tubing, and a stainless steel 303 connector. It operates within an ambient air temperature range of 0°C to +60°C and consumes 50mA of current. This sensor offers IP67 protection and has a response time of 5-15 seconds during startup and 500ms to 3 seconds in normal operation. It features 1 x digital output (20-30Vdc; PNP) and is designed with a rectangular body. The sensor includes protection functions against short-circuit (pulsed) and reverse polarity. It is capable of monitoring flow rates from 1 to 200mL/min (water) and is part of the FCI series. The connection type is a pre-equipped 4-pin M12 Eurofast QD male connector with a 4mm diameter compression fitting process port. It is designed to withstand pressures of 1bar (14.5psi) and requires a supply voltage of 21.6-26.4Vdc (24Vdc nominal). The sensor can monitor medium temperatures ranging from 0 to +60°C.

Turck

FTCI-1/2D10A4P-2ARX-H1160/D506

Verified stock: 0

Turck FTCI-1/2D10A4P-2ARX-H1160/D506 is a sensor designed for inline flow and temperature monitoring, belonging to the FTCI series. This part features a rectangular body made from PBT (Polybutylene Terephthalate) housing and 1.4571 (316Ti) stainless steel tubing. It is equipped with a 5-pin M12 Eurofast QD male connector and two 1/2" Swagelok threaded process ports with a 10mm inline diameter. The sensor is capable of measuring flow rates from 0.5 to 5 gallons per minute (GPM) for water, withstanding pressures up to 20bar (290psi). It operates on a supply voltage of 21.6-26.4Vdc, with a nominal 24Vdc, and can monitor medium temperatures ranging from -10 to +70°C, while the ambient air temperature for operation is between 0°C and +60°C. The device offers an IP65 degree of protection, consumes 100mA (0.1A) of current, and includes 2 digital outputs (NO Normally Open relay dry contacts). Its response time varies from 2-15 seconds during startup to 500ms - 3 seconds (0.5-3 seconds) under normal operation conditions.

Turck

This item can ship within 24h!

FTCI-1/2D10A4P-2LUX-H1141

$1,064.17

Verified stock: 1

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, Analog output flow 0… 10 VDC, Analog output temperature 0…10 VDC, Electrical connection M12 x 1

Turck

FTCI-3/8D10A4P-2LUX-H1140/D504

Verified stock: 0

Turck FTCI-3/8D10A4P-2LUX-H1140/D504 is a sensor designed for inline flow and temperature monitoring within the FTCI series. This sensor features a rectangular body made from PBT (Polybutylene Terephthalate) housing and 1.4571 (316Ti) stainless steel tubing. It is equipped with a 4-pin M12 Eurofast QD male connector and two 3/8" Swagelok threaded process ports with a 10mm inline diameter. The sensor can measure flow rates from 0.5 to 5 gallons per minute (GPM) for water, withstand pressures up to 20 bar (290 psi), and operates on a supply voltage of 21.6-26.4Vdc (24Vdc nominal). It is capable of monitoring medium temperatures ranging from -10 to +70°C and can operate in ambient air temperatures from 0°C to +60°C. The sensor offers an IP65 degree of protection and features two analog outputs (0-10Vdc; one for flow and one for temperature), with a current consumption of 100mA / 0.1A. Its response time varies from 2-15 seconds during startup to 500ms - 3 seconds (0.5-3 s) during normal operation.

Turck

FTCI-3/8D10A4P-LI-UP8X-H1141

Verified stock: 0

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, DC 4-wire, 21.6…26.4 VDC, NO/NC prog., PNP output, 4…20 mA analog output, Analog output provides a current signal proportional to the flow rate for the overall operating range, Plug-in device, M12 x 1

Turck

FTCI-3/4D15A4P-4UP8X-H1160

Verified stock: 0

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, DC 6-wire, PNP outputs, NO/NC programmable

Turck

FTCI-3/8D10A4P-2LIX-H1141

Verified stock: 0

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, Output flow 4…20 mA, linear, Output temperature 4…20 mA, linear, DC 4-wire, 21.6…26.4 VDC, 4…20 mA analog output, Plug-in device, M12 x 1

Turck

FCI-D10A4P-LIX-H1141/A

Verified stock: 0

Turck FCI-D10A4P-LIX-H1141/A is a sensor designed for flow monitoring and transmission in gaseous media. It features a PBT (Polybutylene Terephthalate) housing, stainless steel 316Ti tubing, and a stainless steel 303 connector, ensuring durability and compatibility with various environments. The sensor operates within an ambient air temperature range of -20°C to +70°C and offers a single analog output (4-20mA; linear) for precise data transmission. With a degree of protection rated at IP65, it is safeguarded against dust ingress and low-pressure water jets from any direction. The response time ranges from 10-30 seconds upon startup and narrows to 1-20 seconds during normal operation, facilitating timely flow measurements. Its rectangular body is designed for inline flow monitoring of gaseous media, capable of detecting flow rates between 50cm/s and 40m/s. The sensor is part of the FCI series and comes pre-equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" with 1/4" BSPP threaded male process port, supporting a 10mm inline diameter. It can withstand pressures up to 20bar (290psi) and is powered by a supply voltage of 21.6-26.4Vdc (24Vdc nominal). The medium temperature range mirrors the ambient air temperature range, accommodating -20°C to +70°C.

Turck

FCI-TCD04A4P-AP8X-H1141/D077

Verified stock: 0

Turck FCI-TCD04A4P-AP8X-H1141/D077 is a sensor designed for flow monitoring with a PBT (Polybutylene Terephthalate) housing, stainless steel 316Ti tubing, and a stainless steel 303 connector. It operates within an ambient air temperature range of 0°C to +60°C and consumes 50mA of current. This sensor offers IP67 protection and has a response time of 5-15 seconds during startup and 500ms to 3 seconds in normal operation. It features 1 x digital output (20-30Vdc; PNP) and is designed with a rectangular body. The sensor includes protection functions against short-circuit (pulsed) and reverse polarity. It is capable of monitoring flow rates from 1 to 200mL/min (water) and is part of the FCI series. The connection type is a pre-equipped 4-pin M12 Eurofast QD male connector with a 4mm diameter compression fitting process port. It is designed to withstand pressures of 1bar (14.5psi) and requires a supply voltage of 21.6-26.4Vdc (24Vdc nominal). The sensor can monitor medium temperatures ranging from 0 to +60°C.

Turck

FTCI-1/2D10A4P-2ARX-H1160/D506

Verified stock: 0

Turck FTCI-1/2D10A4P-2ARX-H1160/D506 is a sensor designed for inline flow and temperature monitoring, belonging to the FTCI series. This part features a rectangular body made from PBT (Polybutylene Terephthalate) housing and 1.4571 (316Ti) stainless steel tubing. It is equipped with a 5-pin M12 Eurofast QD male connector and two 1/2" Swagelok threaded process ports with a 10mm inline diameter. The sensor is capable of measuring flow rates from 0.5 to 5 gallons per minute (GPM) for water, withstanding pressures up to 20bar (290psi). It operates on a supply voltage of 21.6-26.4Vdc, with a nominal 24Vdc, and can monitor medium temperatures ranging from -10 to +70°C, while the ambient air temperature for operation is between 0°C and +60°C. The device offers an IP65 degree of protection, consumes 100mA (0.1A) of current, and includes 2 digital outputs (NO Normally Open relay dry contacts). Its response time varies from 2-15 seconds during startup to 500ms - 3 seconds (0.5-3 seconds) under normal operation conditions.

Turck

This item can ship within 24h!

FTCI-1/2D10A4P-2LUX-H1141

$1,064.17

Verified stock: 1

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, Analog output flow 0… 10 VDC, Analog output temperature 0…10 VDC, Electrical connection M12 x 1

Turck

FTCI-3/8D10A4P-2LUX-H1140/D504

Verified stock: 0

Turck FTCI-3/8D10A4P-2LUX-H1140/D504 is a sensor designed for inline flow and temperature monitoring within the FTCI series. This sensor features a rectangular body made from PBT (Polybutylene Terephthalate) housing and 1.4571 (316Ti) stainless steel tubing. It is equipped with a 4-pin M12 Eurofast QD male connector and two 3/8" Swagelok threaded process ports with a 10mm inline diameter. The sensor can measure flow rates from 0.5 to 5 gallons per minute (GPM) for water, withstand pressures up to 20 bar (290 psi), and operates on a supply voltage of 21.6-26.4Vdc (24Vdc nominal). It is capable of monitoring medium temperatures ranging from -10 to +70°C and can operate in ambient air temperatures from 0°C to +60°C. The sensor offers an IP65 degree of protection and features two analog outputs (0-10Vdc; one for flow and one for temperature), with a current consumption of 100mA / 0.1A. Its response time varies from 2-15 seconds during startup to 500ms - 3 seconds (0.5-3 s) during normal operation.

Turck

FTCI-3/8D10A4P-LI-UP8X-H1141

Verified stock: 0

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, DC 4-wire, 21.6…26.4 VDC, NO/NC prog., PNP output, 4…20 mA analog output, Analog output provides a current signal proportional to the flow rate for the overall operating range, Plug-in device, M12 x 1

Turck

FTCI-3/4D15A4P-4UP8X-H1160

Verified stock: 0

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, DC 6-wire, PNP outputs, NO/NC programmable

Turck

FTCI-3/8D10A4P-2LIX-H1141

Verified stock: 0

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, Output flow 4…20 mA, linear, Output temperature 4…20 mA, linear, DC 4-wire, 21.6…26.4 VDC, 4…20 mA analog output, Plug-in device, M12 x 1

Turck

FCI-D10A4P-LIX-H1141/A

Verified stock: 0

Turck FCI-D10A4P-LIX-H1141/A is a sensor designed for flow monitoring and transmission in gaseous media. It features a PBT (Polybutylene Terephthalate) housing, stainless steel 316Ti tubing, and a stainless steel 303 connector, ensuring durability and compatibility with various environments. The sensor operates within an ambient air temperature range of -20°C to +70°C and offers a single analog output (4-20mA; linear) for precise data transmission. With a degree of protection rated at IP65, it is safeguarded against dust ingress and low-pressure water jets from any direction. The response time ranges from 10-30 seconds upon startup and narrows to 1-20 seconds during normal operation, facilitating timely flow measurements. Its rectangular body is designed for inline flow monitoring of gaseous media, capable of detecting flow rates between 50cm/s and 40m/s. The sensor is part of the FCI series and comes pre-equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" with 1/4" BSPP threaded male process port, supporting a 10mm inline diameter. It can withstand pressures up to 20bar (290psi) and is powered by a supply voltage of 21.6-26.4Vdc (24Vdc nominal). The medium temperature range mirrors the ambient air temperature range, accommodating -20°C to +70°C.

Turck

FTCI-N3/4D19A4P-2LIX-H1140/D224 Turck Flow Sensors

Part#:FTCI-N3/4D19A4P-2LIX-H1140/D224

Manufacturer:Turck

Alt. Part#:6870048

Product Details

Product condition

FTCI-N3/4D19A4P-2LIX-H1140/D224 Description

Turck Disclaimer:

Relevant products

FTCI-3/8D10A4P-LI-UP8X-H1141

FTCI-3/4D15A4P-4UP8X-H1160

FTCI-3/8D10A4P-2LIX-H1141

FCI-D10A4P-LIX-H1141/A

FCI-TCD04A4P-AP8X-H1141/D077

FTCI-1/2D10A4P-2ARX-H1160/D506

FTCI-1/2D10A4P-2LUX-H1141

FTCI-3/8D10A4P-2LUX-H1140/D504

FTCI-3/8D10A4P-LI-UP8X-H1141

FTCI-3/4D15A4P-4UP8X-H1160

FTCI-3/8D10A4P-2LIX-H1141

FCI-D10A4P-LIX-H1141/A

FCI-TCD04A4P-AP8X-H1141/D077

FTCI-1/2D10A4P-2ARX-H1160/D506

FTCI-1/2D10A4P-2LUX-H1141

FTCI-3/8D10A4P-2LUX-H1140/D504

FTCI-3/8D10A4P-LI-UP8X-H1141

FTCI-3/4D15A4P-4UP8X-H1160

FTCI-3/8D10A4P-2LIX-H1141

FCI-D10A4P-LIX-H1141/A

We are a proud member of: