FTCI-1/2D10A4P-2ARX-H1160/D506 Turck Industrial Automation Components

Name: FTCI-1/2D10A4P-2ARX-H1160/D506
Brand: Turck

Turck FTCI-1/2D10A4P-2ARX-H1160/D506 Turck FTCI-1/2D10A4P-2ARX-H1160/D506 is a sensor designed for inline flow and temperature monitoring, belonging to the FTCI series. This part features a rectangular body made from PBT (Polybutylene Terephthalate) housing and 1.4571 (316Ti) stainless steel tubing. It is equipped with a 5-pin M12 Eurofast QD male connector and two 1/2" Swagelok threaded process ports with a 10mm inline diameter. The sensor is capable of measuring flow rates from 0.5 to 5 gallons per minute (GPM) for water, withstanding pressures up to 20bar (290psi). It operates on a supply voltage of 21.6-26.4Vdc, with a nominal 24Vdc, and can monitor medium temperatures ranging from -10 to +70°C, while the ambient air temperature for operation is between 0°C and +60°C. The device offers an IP65 degree of protection, consumes 100mA (0.1A) of current, and includes 2 digital outputs (NO Normally Open relay dry contacts). Its response time varies from 2-15 seconds during startup to 500ms - 3 seconds (0.5-3 seconds) under normal operation conditions.

Part#:FTCI-1/2D10A4P-2ARX-H1160/D506

Manufacturer:Turck

Product Lifecycle:Discontinued

Get a quick Quote!

Turck FTCI-1/2D10A4P-2ARX-H1160/D506 is a sensor designed for inline flow and temperature monitoring, belonging to the FTCI series. This part features a rectangular body made from PBT (Polybutylene Terephthalate) housing and 1.4571 (316Ti) stainless steel tubing. It is equipped with a 5-pin M12 Eurofast QD male connector and two 1/2" Swagelok threaded process ports with a 10mm inline diameter. The sensor is capable of measuring flow rates from 0.5 to 5 gallons per minute (GPM) for water, withstanding pressures up to 20bar (290psi). It operates on a supply voltage of 21.6-26.4Vdc, with a nominal 24Vdc, and can monitor medium temperatures ranging from -10 to +70°C, while the ambient air temperature for operation is between 0°C and +60°C. The device offers an IP65 degree of protection, consumes 100mA (0.1A) of current, and includes 2 digital outputs (NO Normally Open relay dry contacts). Its response time varies from 2-15 seconds during startup to 500ms - 3 seconds (0.5-3 seconds) under normal operation conditions.

About the manufacturer: Turck is one of the manufacturers that offers Industrial Automation Components that you can order at Quotebeam.com. Turck is a leading provider of sensor, fieldbus, and connectivity technologies, along with interface technology, human-machine interfaces (HMI), and RFID systems. We offer innovative solutions for factory and process automation requirements, guaranteeing top-notch performance.

Check out the FTCI-1/2D10A4P-2ARX-H1160/D506 Turck price in the box on the right side or send a quick quote.

Product Details

Ambient temperature
0…+60 °C
Protection class
IP65
Function
Flow rate measurement
Electrical connection
Connector, M12 × 1
Operating voltage
21.6…26.4 VDC
Housing material
Plastic, PBT
Output function
NO contact, Relay output
Process connection
1/2” Swagelok
Sensor material
Stainless steel
Design
Inline
Operating principle
Calorimetric

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

Related documents FTCI-1/2D10A4P-2ARX-H1160/D506 Specs

FTCI-1/2D10A4P-2ARX-H1160/D506 English-1630966399308.pdf

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Turck

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Turck Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Turck Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Turck, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

FTCI-N3/4D19A4P-2ARX-H1160

Verified stock: 0

Flow Rate Measurement, Inline Sensor with Integrated Processor, Relay Output 24 VDC NO, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, Hysteresis flow 0.4 … 1.9 l/min, Hysteresis temp 1…10 °C, Temperature monitoring -10…95 °C, Switch-on/switch-off delay 0…50 s, 2 relay switching outputs, Switching outputs 24 VDC NO, Switchpoints freely adju

Turck

FTCI-3/8D10A4P-LI-UP8X-H1141

Verified stock: 0

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, DC 4-wire, 21.6…26.4 VDC, NO/NC prog., PNP output, 4…20 mA analog output, Analog output provides a current signal proportional to the flow rate for the overall operating range, Plug-in device, M12 x 1

Turck

FCI-TCD04A4P-AP8X-H1141/D077

Verified stock: 0

Turck FCI-TCD04A4P-AP8X-H1141/D077 is a sensor designed for flow monitoring with a PBT (Polybutylene Terephthalate) housing, stainless steel 316Ti tubing, and a stainless steel 303 connector. It operates within an ambient air temperature range of 0°C to +60°C and consumes 50mA of current. This sensor offers IP67 protection and has a response time of 5-15 seconds during startup and 500ms to 3 seconds in normal operation. It features 1 x digital output (20-30Vdc; PNP) and is designed with a rectangular body. The sensor includes protection functions against short-circuit (pulsed) and reverse polarity. It is capable of monitoring flow rates from 1 to 200mL/min (water) and is part of the FCI series. The connection type is a pre-equipped 4-pin M12 Eurofast QD male connector with a 4mm diameter compression fitting process port. It is designed to withstand pressures of 1bar (14.5psi) and requires a supply voltage of 21.6-26.4Vdc (24Vdc nominal). The sensor can monitor medium temperatures ranging from 0 to +60°C.

Turck

FTCI-3/4D15A4P-2LIX-H1141

Verified stock: 0

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, Output flow 4…20 mA, linear, Output temperature 4…20 mA, linear, DC 4-wire, 21.6…26.4 VDC, 4…20 mA analog output, Plug-in device, M12 x 1

Turck

FTCI-3/4D15A4P-2UP8X-H1141

Verified stock: 0

Turck

FTCI-3/8D10A4P-2LUX-H1140/D504

Verified stock: 0

Turck FTCI-3/8D10A4P-2LUX-H1140/D504 is a sensor designed for inline flow and temperature monitoring within the FTCI series. This sensor features a rectangular body made from PBT (Polybutylene Terephthalate) housing and 1.4571 (316Ti) stainless steel tubing. It is equipped with a 4-pin M12 Eurofast QD male connector and two 3/8" Swagelok threaded process ports with a 10mm inline diameter. The sensor can measure flow rates from 0.5 to 5 gallons per minute (GPM) for water, withstand pressures up to 20 bar (290 psi), and operates on a supply voltage of 21.6-26.4Vdc (24Vdc nominal). It is capable of monitoring medium temperatures ranging from -10 to +70°C and can operate in ambient air temperatures from 0°C to +60°C. The sensor offers an IP65 degree of protection and features two analog outputs (0-10Vdc; one for flow and one for temperature), with a current consumption of 100mA / 0.1A. Its response time varies from 2-15 seconds during startup to 500ms - 3 seconds (0.5-3 s) during normal operation.

Turck