​
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

FTCI-3/4D15A4P-LI-UP8X-H1141 Turck Flow Sensors

Turck FTCI-3/4D15A4P-LI-UP8X-H1141 Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, DC 4-wire, 21.6…26.4 VDC, NO/NC prog., PNP output, 4…20 mA analog output, Analog output provides a current signal proportional to the flow rate for the overall operating range, Plug-in device, M12 x 1
Turck

Part#:FTCI-3/4D15A4P-LI-UP8X-H1141

Manufacturer:Turck

Alt. Part#:6870811

Product Lifecycle:Active

Get a quick Quote!

Flow Rate Measurement, Inline Sensor with Integrated Processor, Inline sensor, Compact inline flow sensor, Calorimetric principle, Monitoring of flow rate, Monitoring of the medium temperature, For water/glycol mix, Parametrized via button, Protected by software code, DC 4-wire, 21.6…26.4 VDC, NO/NC prog., PNP output, 4…20 mA analog output, Analog output provides a current signal proportional to the flow rate for the overall operating range, Plug-in device, M12 x 1

About the manufacturer: Turck is one of the manufacturers that offers Flow Sensors that you can order at Quotebeam.com. Turck is a leading provider of sensor, fieldbus, and connectivity technologies, along with interface technology, human-machine interfaces (HMI), and RFID systems. We offer innovative solutions for factory and process automation requirements, guaranteeing top-notch performance.

Check out the FTCI-3/4D15A4P-LI-UP8X-H1141 Turck price in the box on the right side or send a quick quote.

Product Details

  • Weight557 g
  • RoHSYes
  • Country Of OriginDEU
  • HTS Code9026102040
  • Output function
    NO/NC programmable, PNP/Analog output
  • Electrical connection
    Connector, M12 × 1
  • Current output
    4…20 mA
  • Housing material
    Plastic, PBT
  • Protection class
    IP65
  • Medium temperature
    -10…+90 °C
  • Ambient temperature
    0…+60 °C
  • Sensor material
    Stainless steel
  • Design
    Inline
  • Operating principle
    Calorimetric
  • Process connection
    3/4'' Swagelok
  • Operating voltage
    21.6…26.4 VDC
  • Medium
    liquids
  • Function
    Flow rate measurement

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

FTCI-3/4D15A4P-LI-UP8X-H1141 Description

Turck FTCI-3/4D15A4P-LI-UP8X-H1141 is a sensor designed for inline flow and temperature monitoring, belonging to the FTCI series. This part features a rectangular body made from PBT (Polybutylene Terephthalate) housing and 1.4571 (316Ti) stainless steel tubing. It is equipped with a 4-pin M12 Eurofast QD male connector and two 3/4" Swagelok threaded process ports with a 15mm inline diameter. The sensor offers protection against short-circuit (pulsed) and reverse polarity. It can measure flow rates from 0.5 to 5 gallons per minute (GPM) for water, withstand pressures up to 20 bar (290 psi), and operates with a supply voltage of 21.6-26.4Vdc (24Vdc nominal). The medium temperature range is -10 to +70°C, while it can operate in ambient air temperatures from 0°C to +60°C. It has an IP65 degree of protection, features one analog output (4-20mA), consumes 100mA / 0.1A of current, and includes one digital output (10.8-30Vdc; PNP). The response time ranges from 2-15 seconds during startup and normal operation times of 500ms to 3 seconds / 0.5-3 seconds, with a control circuit rated current of 200mA / 0.2 A.

Related documents FTCI-3/4D15A4P-LI-UP8X-H1141 Specs

FTCI-3/4D15A4P-LI-UP8X-H1141 English-1630966391699.pdf

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Turck

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Turck Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Turck Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Turck, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

FCI-TCD04A4P-AP8X-H1141/D077 Part Image. Manufactured by Turck.

FCI-TCD04A4P-AP8X-H1141/D077

Verified stock: 0

Turck FCI-TCD04A4P-AP8X-H1141/D077 is a sensor designed for flow monitoring with a PBT (Polybutylene Terephthalate) housing, stainless steel 316Ti tubing, and a stainless steel 303 connector. It operates within an ambient air temperature range of 0°C to +60°C and consumes 50mA of current. This sensor offers IP67 protection and has a response time of 5-15 seconds during startup and 500ms to 3 seconds in normal operation. It features 1 x digital output (20-30Vdc; PNP) and is designed with a rectangular body. The sensor includes protection functions against short-circuit (pulsed) and reverse polarity. It is capable of monitoring flow rates from 1 to 200mL/min (water) and is part of the FCI series. The connection type is a pre-equipped 4-pin M12 Eurofast QD male connector with a 4mm diameter compression fitting process port. It is designed to withstand pressures of 1bar (14.5psi) and requires a supply voltage of 21.6-26.4Vdc (24Vdc nominal). The sensor can monitor medium temperatures ranging from 0 to +60°C.

Turck

FTCI-1/2D10A4P-2ARX-H1160/D506 Part Image. Manufactured by Turck.

FTCI-1/2D10A4P-2ARX-H1160/D506

Verified stock: 0

Turck FTCI-1/2D10A4P-2ARX-H1160/D506 is a sensor designed for inline flow and temperature monitoring, belonging to the FTCI series. This part features a rectangular body made from PBT (Polybutylene Terephthalate) housing and 1.4571 (316Ti) stainless steel tubing. It is equipped with a 5-pin M12 Eurofast QD male connector and two 1/2" Swagelok threaded process ports with a 10mm inline diameter. The sensor is capable of measuring flow rates from 0.5 to 5 gallons per minute (GPM) for water, withstanding pressures up to 20bar (290psi). It operates on a supply voltage of 21.6-26.4Vdc, with a nominal 24Vdc, and can monitor medium temperatures ranging from -10 to +70°C, while the ambient air temperature for operation is between 0°C and +60°C. The device offers an IP65 degree of protection, consumes 100mA (0.1A) of current, and includes 2 digital outputs (NO Normally Open relay dry contacts). Its response time varies from 2-15 seconds during startup to 500ms - 3 seconds (0.5-3 seconds) under normal operation conditions.

Turck

FTCI-3/8D10A4P-2LUX-H1140/D504 Part Image. Manufactured by Turck.

FTCI-3/8D10A4P-2LUX-H1140/D504

Verified stock: 0

Turck FTCI-3/8D10A4P-2LUX-H1140/D504 is a sensor designed for inline flow and temperature monitoring within the FTCI series. This sensor features a rectangular body made from PBT (Polybutylene Terephthalate) housing and 1.4571 (316Ti) stainless steel tubing. It is equipped with a 4-pin M12 Eurofast QD male connector and two 3/8" Swagelok threaded process ports with a 10mm inline diameter. The sensor can measure flow rates from 0.5 to 5 gallons per minute (GPM) for water, withstand pressures up to 20 bar (290 psi), and operates on a supply voltage of 21.6-26.4Vdc (24Vdc nominal). It is capable of monitoring medium temperatures ranging from -10 to +70°C and can operate in ambient air temperatures from 0°C to +60°C. The sensor offers an IP65 degree of protection and features two analog outputs (0-10Vdc; one for flow and one for temperature), with a current consumption of 100mA / 0.1A. Its response time varies from 2-15 seconds during startup to 500ms - 3 seconds (0.5-3 s) during normal operation.

Turck

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo