LC1D09BD Schneider Electric Automation components

LC1D09BD Product Details

• Product Certifications
  LROS (Lloyds register of shipping) CSA UL GOST DNV CCC GL BV RINA
• Standards
  CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
• Motor Power HP (UL / CSA)
  1 hp 230/240 V at AC 50/60 Hz for 1 phase 2 hp 200/208 V at AC 50/60 Hz for 3 phase 2 hp 230/240 V at AC 50/60 Hz for 3 phase 5 hp 460/480 V at AC 50/60 Hz for 3 phase 7.5 hp 575/600 V at AC 50/60 Hz for 3 phase 0.33 hp 115 V at A
• Motor Power Kw
  2.2 kW 220...230 V AC 50/60 Hz AC-3) 4 kW 380...400 V AC 50/60 Hz AC-3) 4 kW 415...440 V AC 50/60 Hz AC-3) 5.5 kW 500 V AC 50/60 Hz AC-3) 5.5 kW 660...690 V AC 50/60 Hz AC-3) 2.2 kW 400 V AC 50/60 Hz AC-4)
• [Ui] Rated Insulation Voltage
  Power circuit 690 V IEC 60947-4-1 Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL
• [Icw] Rated Short-Time Withstand Current
  105 A 104 °F (40 °C) - 10 s power circuit 210 A 104 °F (40 °C) - 1 s power circuit 30 A 104 °F (40 °C) - 10 min power circuit 61 A 104 °F (40 °C) - 1 min power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circu
• Tightening Torque
  Power circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Power circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lb
• Control Circuit Voltage Limits
  0.1...0.25 Uc -40…158 °F (-40…70 °C) drop-out DC 0.7...1.25 Uc -40…140 °F (-40…60 °C) operational DC 1...1.25 Uc 140…158 °F (60…70 °C) operational DC
• Utilisation Category
  AC-4 AC-1 AC-3
• Associated Fuse Rating
  10 A gG signalling circuit IEC 60947-5-1 25 A gG <= 690 V type 1 power circuit 20 A gG <= 690 V type 2 power circuit
• Connections - Terminals
  Power circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Power circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)flexible without cable end Power circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible
• Irms Rated Making Capacity
  250 A 440 V power circuit IEC 60947 140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1
• Electrical Durability
  0.6 Mcycles 25 A AC-1 <= 440 V 2 Mcycles 9 A AC-3 <= 440 V
• Operating Time
  53.55...72.45 ms closing 16...24 ms opening
• Auxiliary Contacts Type
  Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
• Safety Reliability Level
  B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
• Power Dissipation Per Pole
  1.56 W AC-1 0.2 W AC-3
• Non-Overlap Time
  1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
• Contactor Application
  Motor control Resistive load
• [Ue] Rated Operational Voltage
  Power circuit <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
[Ie] Rated Operational Current
9 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit 25 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
Mounting Support
Plate Rail
[Ith] Conventional Free Air Thermal Current
25 A 140 °F (60 °C) power circuit 10 A 140 °F (60 °C) signalling circuit
Insulation Resistance
> 10 MOhm signalling circuit
Minimum Switching Current
5 mA signalling circuit
Signalling Circuit Frequency
25...400 Hz
Minimum Switching Voltage
17 V signalling circuit
Hold-In Power Consumption In W
5.4 W 68 °F (20 °C)
Inrush Power In W
5.4 W 68 °F (20 °C))
Time Constant
28 ms
Coil Technology
Built-in bidirectional peak limiting diode suppressor
Mechanical Durability
30 Mcycles
Maximum Operating Rate
3600 cyc/h 140 °F (60 °C)
Front Cover
With
Average Impedance
2.5 mOhm - Ith 25 A 50 Hz power circuit
Rated Breaking Capacity
250 A 440 V power circuit IEC 60947
Auxiliary Contact Composition
1 NO + 1 NC
Overvoltage Category
III
[Uimp] Rated Impulse Withstand Voltage
6 kV IEC 60947
[Uc] Control Circuit Voltage
24 V DC
Power Pole Contact Composition
3 NO
Device Short Name
LC1D
Product Name
TeSys D
Control Circuit Type
DC standard
Product Or Component Type
Contactor
Poles Description
3P
Range
TeSys

Product condition

Related documents LC1D09BD Specs