3969918 Phoenix Contact Terminal Blocks

Product Details

• Maximum power dissipation for nominal condition
  1.31 W
• Nominal voltage UN
  400 V AC/DC
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short-time current
  1250 A
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Number of positions
  3
• Number of levels
  1
• Number of connections
  6
• Nominal cross section
  6 mm²
• Maximum load current
  30 A (with 10 mm² conductor cross section)
• Note regarding shock protection
  Back of hand protection without cable lug, as well as with insulated and uninsulated cable lugs with shrink sleeve with tightened clamping screw.
• Result of voltage-drop test
  Test passed
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
81 mm
Connection
1 level
Tightening torque, min
1.5 Nm
Max. AWG conductor cross section, flexible
8
Min. AWG conductor cross section, flexible
24
Max. cross section for cable lug connection
10 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ETIM 7.0
EC000902
UNSPSC 6.01
30211811
Potentials
3
Rated surge voltage
4 kV
Terminal block mounting
0.8 Nm ... 1 Nm
Power frequency withstand voltage setpoint
1.89 kV
Setpoint
5 N
Conductor cross section short circuit testing
4 mm²
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
57.1 mm
Plate thickness
1 mm ... 4 mm
Stripping length
12 mm
Conductor cross section flexible max.
10 mm²
ASD level
6.12 (m/s2)2/Hz
2 conductors with same cross section, solid min.
0.5 mm²
Min. cross section for cable lug connection
0.5 mm²
Bolt diameter
4.1 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141126
ECLASS 5.1
27141100
ECLASS 9.0
27141126
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Note
Test with 4 mm² / 500 A / 1 s includes test with 4 mm² / 480 A / 1 s in accordance with IEC 60947-7-1:2009-04.
Oscillation, broadband noise test result
Test passed
ECLASS 4.0
27141100
ECLASS 7.0
27141126
ETIM 6.0
EC000902
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Pitch
8.2 mm
Screw thread
No 8 UNC
2 conductors with same cross section, stranded min.
0.5 mm²
Color
gray
Insulating material
PA
Test surge voltage
5 kV
Insulating material group
I
Cable lug width, max.
8 mm
Mounting type
Wall mounting
Ambient temperature (actuation)
-5 °C ... 70 °C
Flammability rating according to UL 94
V0
Overvoltage category
III
Open side panel
No
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Tightening torque max
1.8 Nm
Connection in acc. with standard
IEC 60947-7-1
Cable lug connection according to standard
DIN 46237:1970-07
Hole diameter, min.
4.3 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141126
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
70.1 mm
Connection method
Ring cable lug
Conductor cross section flexible min.
0.5 mm²
2 conductors with same cross section, solid max.
6 mm²
2 conductors with same cross section, stranded max.
6 mm²
Internal cylindrical gage
A5
Max. tightening torque of the mounting screw:
1 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410