3969920 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  4
• Rated surge voltage
  4 kV
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 10.0.1
  27141126
• ECLASS 4.1
  27141100
• ETIM 6.0
  EC000902
• UNSPSC 12.01
  39121410
• Nominal cross section
  6 mm²
• Flammability rating according to UL 94
  V0
• Terminal block mounting
  0.8 Nm ... 1 Nm
• Note regarding shock protection
  Back of hand protection without cable lug, as well as with insulated and uninsulated cable lugs with shrink sleeve with tightened clamping screw.
• Result of tight fit on support
  Test passed
• Short-time current
  1250 A
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test duration per axis
  5 h
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock duration
  18 ms
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• Max. tightening torque of the mounting screw:
  1 Nm
• ECLASS 5.1
  27141100
UNSPSC 7.0901
39121410
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
Number of levels
1
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Plate thickness
1 mm ... 4 mm
Insulating material
PA
Nominal voltage UN
400 V AC/DC
Maximum load current
30 A (with 10 mm² conductor cross section)
Result of surge voltage test
Test passed
Setpoint
5 N
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Connection method
Ring cable lug
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, stranded min.
0.5 mm²
Shock test result
Test passed
Mounting type
Wall mounting
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
ECLASS 11.0
27141126
Number of connections
8
Test surge voltage
5 kV
Maximum power dissipation for nominal condition
1.31 W
2 conductors with same cross section, solid min.
0.5 mm²
Min. cross section for cable lug connection
0.5 mm²
Max. cross section for cable lug connection
10 mm²
Internal cylindrical gage
A5
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Note
Test with 4 mm² / 500 A / 1 s includes test with 4 mm² / 480 A / 1 s in accordance with IEC 60947-7-1:2009-04.
Result of thermal test
Test passed
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Width
65.2 mm
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Screw thread
No 8 UNC
Connection in acc. with standard
IEC 60947-7-1
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
81 mm
Height
70.1 mm
Tightening torque, min
1.5 Nm
Max. AWG conductor cross section, flexible
8
Cable lug connection according to standard
DIN 46237:1970-07
Hole diameter, min.
4.3 mm
Min. tightening torque of the mounting screw:
0.8 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 13.2
39121410
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Overvoltage category
III
Power frequency withstand voltage setpoint
1.89 kV
Result of temperature-rise test
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Pitch
8.2 mm
Conductor cross section flexible min.
0.5 mm²
2 conductors with same cross section, solid max.
6 mm²
Bolt diameter
4.1 mm
Color
gray
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Result of voltage-drop test
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
12 mm
2 conductors with same cross section, stranded max.
6 mm²
Back of the hand protection
guaranteed
Conductor cross section short circuit testing
4 mm²
Number of shocks per direction
3
Tightening torque max
1.8 Nm
Insulating material group
I
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 2, bogie-mounted
Cable lug width, max.
8 mm
Connection
1 level
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Number of positions
4
Conductor cross section flexible max.
10 mm²
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27141126
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
UNSPSC 20.0
39121410
ECLASS 5.0
27141100