3260145 Phoenix Contact Terminal Blocks

3260145 Product Details

• Connection method
  Push-in connection
• Min. AWG conductor cross section, flexible
  20
• Stripping length
  18 mm
• Conductor cross section flexible min.
  0.5 mm²
• Open side panel
  No
• Number of levels
  1
• Nominal cross section
  10 mm²
• Overvoltage category
  III
• Maximum load current
  57 A (The maximum load current must not be exceeded by the total current of all connected conductors.)
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Conductor cross section short circuit testing
  10 mm²
• Nominal current IN
  57 A
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  4 mm²
• Connection cross sections directly pluggable
  1 mm² 16 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 9.0
27141151
Max. AWG conductor cross section, flexible
8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Internal cylindrical gage
A6
ECLASS 11.0
27141151
ECLASS 4.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121402
Maximum power dissipation for nominal condition
1.82 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Nominal voltage UN
1500 V
Back of the hand protection
guaranteed
Acceleration
30g
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141151
ECLASS 5.1
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC002021
UNSPSC 12.01
39121411
UNSPSC 20.0
39121402
Ageing test for screwless modular terminal block temperature cycles
192
Height
34.7 mm
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
UNSPSC 6.01
30211812
UNSPSC 21.0
39121402
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Rated surge voltage
8 kV
Number of connections
2
Flammability rating according to UL 94
V0
Bending test turns
135
Color
gray
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of temperature-rise test
Test passed
Short-time current
1.2 kA
Shock duration
18 ms
Potentials
1
Insulating material group
I
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Width
18.5 mm
Test spectrum
Service life test category 2, bogie-mounted
Degree of pollution
3
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ECLASS 5.0
27141100
ECLASS 7.0
27141151
UNSPSC 18.0
39121402
Test directions
X-, Y- and Z-axis (pos. and neg.)
Tensile test result
Test passed
ECLASS 4.1
27141100
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
35 mm
ETIM 6.0
EC002021
Insulating material
PA
UNSPSC 11
39121411
UNSPSC 19.0
39121402
Result of thermal test
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG max.
6
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section solid min.
1 mm²
Conductor cross section solid max.
16 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection
1 level
Conductor cross section AWG min.
20

Product condition