3260050 Phoenix Contact Terminal Blocks

3260050 Product Details

• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Connection method
  Power-Turn connection
• Number of positions
  1
• Degree of pollution
  3
• Maximum load current
  150 A (with 70 mm² conductor cross section)
• Open side panel
  No
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  10 mm² / 2 kg
• Result of voltage-drop test
  Test passed
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test duration per axis
  5 h
• Shock duration
  18 ms
• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Nominal voltage UN
  1000 V AC
• Finger protection
  guaranteed
• Width
  20 mm
• Potentials
  1
• Overvoltage category
  III
Number of levels
1
Color
gray
Insulating material group
I
Back of the hand protection
guaranteed
Nominal cross section
50 mm²
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
4.73 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of temperature-rise test
Test passed
Short-time current
6 kA
Result of surge voltage test
Test passed
Bending test turns
135
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of aging test
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
ASD level
6.12 (m/s2)2/Hz
Insulating material
PA
Result of flexion and pull-out test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 2, bogie-mounted
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
2/0
Conductor cross section flexible, with ferrule with plastic sleeve max.
50 mm²
Cross section with insertion bridge stranded, with ferrule with plastic sleeve max.
50 mm²
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Oscillation, broadband noise test result
Test passed
Tensile test result
Test passed
Nominal current IN
150 A
Setpoint
10 N
Conductor cross section short circuit testing
50 mm²
Shock test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
30 mm ... 32 mm
ECLASS 5.0
27141100
Conductor cross section flexible min.
10 mm²
Cross section with insertion bridge solid min.
10 mm²
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection
1 level
Conductor cross section solid max.
70 mm²
Conductor cross section flexible max.
70 mm²
ECLASS 10.0.1
27141120
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section AWG min.
8
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
105 mm
Max. AWG conductor cross section, flexible
2/0
Conductor cross section flexible, with ferrule with plastic sleeve min.
10 mm²
Cross section with insertion bridge stranded, with ferrule without plastic sleeve min.
10 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Length
101 mm
Conductor cross section solid min.
10 mm²
Min. AWG conductor cross section, flexible
8
Cross section with insertion bridge, stranded max.
50 mm²
Internal cylindrical gage
A10
ECLASS 5.1
27141100
ETIM 7.0
EC000897
Conductor cross section flexible, with ferrule without plastic sleeve min.
10 mm²
Cross section with insertion bridge stranded min.
10 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
50 mm²
Cross section with insertion bridge stranded, with ferrule without plastic sleeve max.
50 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Number of shocks per direction
3
Cross section with insertion bridge, solid max.
50 mm²
Connection cross sections directly pluggable
10 mm² 70 mm² 8 2/0
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 9.0
27141120
UNSPSC 19.0
39121410

Product condition