3260139 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  black/yellow
• Area of application
  Railway industry
• Insulating material group
  I
• Nominal voltage UN
  1000 V AC
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short-time current
  11.4 kA
• Acceleration
  30g
• Shock form
  Half-sine
• Open side panel
  No
• Result of power-frequency withstand voltage test
  Test passed
• Bending test conductor cross section/weight
  25 mm² / 4.5 kg
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Rated surge voltage
  8 kV
• Maximum power dissipation for nominal condition
  7.54 W
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Bending test turns
135
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
95 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
Number of positions
1
Potentials
1
Insulating material
PA
Overvoltage category
III
Maximum load current
232 A (with 95 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Setpoint
15 N
Tensile test result
Test passed
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Nominal cross section
95 mm²
Degree of pollution
3
Nominal current IN
232 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Connection cross sections directly pluggable
25 mm² 95 mm²
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
99.8 mm
Conductor cross section solid min.
25 mm²
ETIM 7.0
EC000897
Conductor cross section flexible, with ferrule with plastic sleeve min.
25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 6.0
EC000897
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ECLASS 6.0
27141100
UNSPSC 11
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ECLASS 4.1
27141100
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Stripping length
40 mm
Width
25 mm
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
105.5 mm
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve max.
95 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 5.1
27141100
Conductor cross section AWG max.
4/0
Conductor cross section flexible, with ferrule without plastic sleeve min.
25 mm²
Cross section with insertion bridge, solid max.
95 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
4
Min. AWG conductor cross section, flexible
4
Cross section with insertion bridge, stranded max.
70 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section solid max.
95 mm²
Max. AWG conductor cross section, flexible
4/0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
108.7 mm
Conductor cross section flexible min.
25 mm²
Conductor cross section flexible max.
95 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
95 mm²
Connection method
Power-Turn connection