3260061 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  gray
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short-time current
  6 kA
• Result of aging test
  Test passed
• Acceleration
  30g
• Shock form
  Half-sine
• Nominal cross section
  50 mm²
• Maximum power dissipation for nominal condition
  4.73 W
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Conductor cross section flexible max.
  70 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  50 mm²
• Cross section with insertion bridge stranded, with ferrule without plastic sleeve min.
  10 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 7.0
  27141120
• UNSPSC 18.0
  39121410
• UNSPSC 21.0
  39121410
Ageing test for screwless modular terminal block temperature cycles
192
Potentials
1
Rated surge voltage
8 kV
Nominal current IN
150 A
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible min.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
10 mm²
Cross section with insertion bridge, solid max.
50 mm²
Cross section with insertion bridge stranded min.
10 mm²
Cross section with insertion bridge stranded, with ferrule with plastic sleeve max.
50 mm²
ECLASS 5.0
27141100
ECLASS 5.1
27141100
Number of positions
1
Flammability rating according to UL 94
V0
Insulating material group
I
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
10 mm² / 2 kg
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
50 mm²
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Drill hole spacing
123.4 mm
Conductor cross section solid max.
70 mm²
ETIM 6.0
EC000897
Cross section with insertion bridge solid min.
10 mm²
Cross section with insertion bridge, stranded max.
50 mm²
Cross section with insertion bridge stranded, with ferrule without plastic sleeve max.
50 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
UNSPSC 19.0
39121410
Number of connections
2
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
1000 V AC
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible, with ferrule with plastic sleeve min.
10 mm²
Internal cylindrical gage
A10
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Degree of pollution
3
Maximum load current
150 A (with 50 mm² conductor cross section)
Open side panel
No
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test turns
135
Setpoint
10 N
Result of tight fit on support
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
101 mm
Height
96 mm
Stripping length
30 mm ... 32 mm
Conductor cross section AWG max.
2/0
Max. AWG conductor cross section, flexible
2/0
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Min. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
50 mm²
Connection cross sections directly pluggable
10 mm² 70 mm² 8 2/0
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
Pitch
20 mm
Connection
1 level
Width
20 mm
Connection method
Power-Turn connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
8
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Hole diameter
6.5 mm
Conductor cross section solid min.
10 mm²