3245040 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  1
• Rated surge voltage
  6 kV
• Note
  Assembly instruction:In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips.The corresponding support brackets can be found at
• Color
  blue
• Nominal voltage UN
  400 V
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test rotation speed
  10 rpm
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Result of aging test
  Test passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Nominal cross section
  10 mm²
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Maximum power dissipation for nominal condition
  1.82 W
• Finger protection
  guaranteed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Result of voltage-drop test
  Test passed
Conductor cross section short circuit testing
10 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height
46.9 mm
Stripping length
10 mm
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
2 conductors with same cross section, stranded max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
ECLASS 10.0.1
27141138
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Number of levels
1
Insulating material
PA
Nominal current IN
57 A
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
55 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
2 conductors with same cross section, solid max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
ECLASS 4.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC001257
UNSPSC 12.01
39121410
UNSPSC 11
39121410
Potentials
1
Maximum load current
57 A
Degree of pollution
3
Open side panel
Yes
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Tight fit on carrier
NS 35
Setpoint
5 N
Ageing test for screwless modular terminal block temperature cycles
192
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
10.2 mm
Connection method
Screw connection
Height NS 35/7,5
47.5 mm
Tightening torque max
1.8 Nm
Conductor cross section flexible max.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
2 conductors with same cross section, solid min.
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141138
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
Overvoltage category
III
Result of surge voltage test
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
1.2 kA
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Length
55 mm
Tightening torque, min
1.5 Nm
Conductor cross section AWG max.
6
Max. AWG conductor cross section, flexible
6
Min. AWG conductor cross section, flexible
20
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 4.0
EC000902
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Screw thread
M4
Conductor cross section solid max.
16 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141100
ECLASS 9.0
27141138
ECLASS 7.0
27141138
ETIM 6.0
EC001257
UNSPSC 21.0
39121410