3245011 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Rated surge voltage
  4 kV
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection
  guaranteed
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Short-time current
  0.3 kA
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 35/15
  55 mm
• Note
  Assembly instruction:In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips.The corresponding support brackets can be found at
• Insulating material
  PA
• Nominal voltage UN
  250 V
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tight fit on carrier
  NS 35
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Connection method
  Screw connection
Number of levels
1
Color
blue
Flammability rating according to UL 94
V0
Overvoltage category
III
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Setpoint
1 N
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
5.2 mm
Tightening torque, min
0.5 Nm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141138
ECLASS 5.1
27141100
ETIM 4.0
EC000902
ETIM 3.0
EC000897
UNSPSC 21.0
39121410
Potentials
1
Maximum load current
24 A
Maximum power dissipation for nominal condition
0.77 W
Nominal current IN
24 A
Power frequency withstand voltage setpoint
1.5 kV
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Tightening torque max
0.6 Nm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
26
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Conductor cross section short circuit testing
2.5 mm²
Result of aging test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
55 mm
Screw thread
M3
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 7.0
27141138
ECLASS 9.0
27141138
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
2.2 mm
Height NS 35/7,5
47.5 mm
Stripping length
9 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 6.0
EC001257
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible min.
0.14 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141138
ECLASS 5.0
27141100
ETIM 7.0
EC001257
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410