3245024 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Degree of pollution
  3
• Nominal current IN
  32 A
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/7,5
  47.5 mm
• Tightening torque, min
  0.6 Nm
• Conductor cross section flexible max.
  6 mm²
• Conductor cross section AWG min.
  26
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• 2 conductors with same cross section, stranded min.
  0.14 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 11.0
  27141138
• ECLASS 4.1
  27141100
ETIM 3.0
EC000897
ETIM 6.0
EC001257
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Number of connections
1
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Ageing test for screwless modular terminal block temperature cycles
192
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ECLASS 7.0
27141138
Note
Assembly instruction:In order to securely fix the neutral busbar in place, support brackets must be placed at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips.The corresponding support brackets can be found at
Nominal cross section
4 mm²
Maximum power dissipation for nominal condition
1.02 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
6.2 mm
Length
55 mm
Screw thread
M3
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC001257
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 12.01
39121410
Number of levels
1
Color
blue
Maximum load current
32 A
Insulating material group
I
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Screw connection
Stripping length
9 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ECLASS 9.0
27141138
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
250 V
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.5 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Short circuit stability result
Test passed
Result of thermal test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
55 mm
Tightening torque max
0.8 Nm
Conductor cross section solid max.
6 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141138
ECLASS 6.0
27141100