3244481 Phoenix Contact Terminal Blocks

3244481 Product Details

• Nominal cross section
  2.5 mm²
• Insulating material group
  I
• Open side panel
  Yes
• Result of power-frequency withstand voltage test
  Test passed
• Number of connections
  3
• Rated surge voltage
  4 kV
• Nominal current IN
  20 A
• Back of the hand protection
  guaranteed
• Insulating material
  PA
• Degree of pollution
  3
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Setpoint
  1 N
• Conductor cross section short circuit testing
  4 mm²
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock form
  Half-sine
• Width
  7 mm
Connection method
Push-in connection
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141128
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Potentials
3
Maximum load current
20 A
Overvoltage category
III
Nominal voltage UN
250 V
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.5 kV
Bending test rotation speed
10 rpm
Short circuit stability result
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Length
90.8 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of levels
4
Color
orange
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Note
Please observe the current carrying capacity of the DIN rails.
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Short-time current
0.48 kA
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Height NS 35/7,5
41.5 mm
Height NS 35/15
49 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 7.0
27141128
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock test result
Test passed
End cover width
2.2 mm
Static insulating material application in cold
-60 °C
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141128
ETIM 7.0
EC000900
UNSPSC 18.0
39121410
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Connection in acc. with standard
IEC 60947-7-1/IEC 60947-7-2
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141128
ECLASS 4.1
27141100
ETIM 3.0
EC000897
ETIM 6.0
EC000900
UNSPSC 19.0
39121410

Product condition