3213962 Phoenix Contact Terminal Blocks

Product Details

• Rated surge voltage
  8 kV
• Degree of pollution
  3
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 4.1
  27141100
• ECLASS 7.0
  27141125
• ETIM 7.0
  EC001329
• UNSPSC 19.0
  39121410
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Acceleration
  5g
• Internal cylindrical gage
  A3
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 10.0.1
  27141125
• ECLASS 5.0
  27141100
• ETIM 6.0
  EC001329
• UNSPSC 11
  39121410
• UNSPSC 13.2
  39121410
• UNSPSC 21.0
  39121410
• Insulating material group
  I
Value
0.34 mm²
ECLASS 11.0
27141125
ECLASS 9.0
27141125
UNSPSC 12.01
39121410
Nominal current IN
24 A
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Number of levels
1
Color
green-yellow
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Oscillation, broadband noise test result
Test passed
Shock duration
30 ms
Conductor cross section solid min.
0.34 mm²
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Note
Please observe the current carrying capacity of the DIN rails.
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Nominal cross section
4 mm²
Nominal voltage UN
800 V
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
42.5 mm
Connection
1 level
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Potentials
2
Open side panel
Yes
Finger protection
guaranteed
ASD level
1.857 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
5.2 mm
Height NS 35/7,5
44 mm
Connection method
Push-in connection
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Number of connections
2
Insulating material
PA
Back of the hand protection
guaranteed
Test spectrum
Service life test category 1, class B, body mounted
Shock test result
Test passed
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
59.5 mm
Height NS 35/15
51.5 mm
Connection in acc. with standard
CUL
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²