3213960 Phoenix Contact Terminal Blocks

3213960 Product Details

• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Nominal voltage UN
  250 V
• Open side panel
  Yes
• Bending test turns
  135
• Test duration per axis
  5 h
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of voltage-drop test
  Test passed
• Short-time current
  0.18 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  5g
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Number of levels
  3
• Nominal cross section
  4 mm²
Insulating material
PA
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Nominal current IN
16 A
Result of surge voltage test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Height NS 35/15
58 mm
Conductor cross section solid min.
0.34 mm²
Max. AWG conductor cross section, flexible
12
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
Number of connections
5
Insulating material group
I
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Setpoint
1 N
Tight fit on carrier
NS 35
Test spectrum
Service life test category 1, class B, body mounted
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
ECLASS 5.0
27141100
UNSPSC 13.2
39121410
UNSPSC 11
39121410
Potentials
2
Rated surge voltage
4 kV
Maximum load current
16 A (with 4 mm² conductor cross section)
Finger protection
guaranteed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
50.5 mm
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
26
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Value
0.34 mm²
ECLASS 10.0.1
27141125
ECLASS 4.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Color
gray
Degree of pollution
3
Back of the hand protection
guaranteed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
1.5 mm²
ASD level
1.857 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
30 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
101 mm
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
5.2 mm
End cover width
2.2 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Connection in acc. with standard
CUL
ECLASS 11.0
27141125
ECLASS 5.1
27141100
ECLASS 9.0
27141125
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
ECLASS 7.0
27141125
UNSPSC 21.0
39121410
ETIM 7.0
EC001329
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 6.0
EC001329
UNSPSC 20.0
39121410

Product condition