3213949 Phoenix Contact Terminal Blocks
Part#:3213949
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 1349
Nov 21, 2024
Installation ground terminal block, Push-in connection, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3213949 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Potentials 2
- Rated surge voltage 4 kV
- Maximum load current 30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
- Back of the hand protection guaranteed
- Power frequency withstand voltage setpoint 1.89 kV
- Result of power-frequency withstand voltage test Test passed
- Bending test conductor cross section/weight 0.14 mm² / 0.2 kg
- Setpoint 1 N
- Degree of pollution 3
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Nominal current IN 24 A (with 4 mm² conductor cross section)
- Tensile test result Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Result of thermal test Test passed
- Result of aging test Test passed
- Acceleration 5g
- Shock duration 30 ms
- Static insulating material application in cold -60 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Width 5.2 mm
- Height NS 35/7,5 50.5 mm
- ECLASS 11.0 27141125
- Nominal cross section 4 mm²
- Flammability rating according to UL 94 V0
- Open side panel Yes
- Result of surge voltage test Test passed
- Result of flexion and pull-out test Test passed
- Result of tight fit on support Test passed
- Result of temperature-rise test Test passed
- Ageing test for screwless modular terminal block temperature cycles 192
- Test duration per axis 5 h
- Shock form Half-sine
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- End cover width 2.2 mm
- Length 101 mm
- Stripping length 8 mm ... 10 mm
- Min. AWG conductor cross section, flexible 26
- Max. AWG conductor cross section, flexible 12
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Number of levels 3
- ECLASS 4.0 27141100
- ECLASS 5.0 27141100
- ECLASS 7.0 27141125
- ETIM 6.0 EC001329
- UNSPSC 11 39121410
- UNSPSC 20.0 39121410
- ECLASS 4.1 27141100
- ETIM 7.0 EC001329
- UNSPSC 13.2 39121410
- UNSPSC 21.0 39121410
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 6.0 27141100
- ECLASS 5.1 27141100
- UNSPSC 7.0901 39121410
- UNSPSC 12.01 39121410
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Height 48.6 mm
- Height NS 35/15 58 mm
- Conductor cross section AWG max. 12
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- Connection cross sections directly pluggable 0.34 mm² 4 mm²
- Internal cylindrical gage A3
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- UNSPSC 19.0 39121410
- Overvoltage category III
- Result of voltage-drop test Test passed
- Short circuit stability result Test passed
- Short-time current 0.48 kA
- Oscillation, broadband noise test result Test passed
- Shock test result Test passed
- Number of shocks per direction 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Connection 1st, 2nd and 3rd level
- Conductor cross section solid max. 4 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- UNSPSC 6.01 30211811
- UNSPSC 18.0 39121410
- Number of connections 5
- Maximum power dissipation for nominal condition 1.02 W (the value is multiplied when connecting multiple levels)
- Nominal voltage UN 400 V (phase conductor/phase conductor)
- Finger protection guaranteed
- Bending test rotation speed 10 rpm
- Conductor cross section short circuit testing 4 mm²
- Color gray
- Test spectrum Service life test category 1, class B, body mounted
- Test frequency f1 = 5 Hz to f2 = 150 Hz
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Note Please observe the current carrying capacity of the DIN rails.
- Conductor cross section solid min. 0.34 mm²
- Conductor cross section flexible max. 4 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 0.5 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 10.0.1 27141125
- ETIM 4.0 EC000897
- ECLASS 9.0 27141125
- Insulating material PA
- Insulating material group I
- Note regarding shock protection Depending on the end application with regard to the busbar.
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Bending test turns 135
- Tight fit on carrier NS 35
- Proof of thermal characteristics (needle flame) effective duration 30 s
- ASD level 0.964 (m/s2)2/Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Connection method Push-in connection
- Conductor cross section AWG min. 26
- Conductor cross section flexible min. 0.14 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Connection in acc. with standard CUL
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$7.07
Stock:
1,349
Select Qty:
$7.07
$7.07 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨