3213955 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  5
• Color
  gray
• Rated surge voltage
  4 kV
• Insulating material group
  I
• Maximum load current
  16 A (with a 2.5 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Connection in acc. with standard
  CUL
• ECLASS 4.0
  27141100
• ECLASS 5.1
  27141100
• UNSPSC 6.01
  30211811
• UNSPSC 12.01
  39121410
• UNSPSC 21.0
  39121410
Number of levels
3
Nominal cross section
4 mm²
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
250 V
Open side panel
Yes
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Setpoint
1 N
Short circuit stability result
Test passed
Short-time current
0.18 kA
Result of aging test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
50.5 mm
Height NS 35/15
58 mm
Conductor cross section AWG min.
26
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141125
ECLASS 4.1
27141100
ECLASS 7.0
27141125
ETIM 6.0
EC001329
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Potentials
2
Insulating material
PA
Degree of pollution
3
Overvoltage category
III
Nominal current IN
16 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
1.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
101 mm
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Value
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141125
ECLASS 9.0
27141125
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
0.02 g²/Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
End cover width
2.2 mm
Connection method
Push-in connection
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 7.0
EC001329
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410