3213951 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Insulating material group
  I
• Open side panel
  Yes
• Number of levels
  3
• Color
  gray
• Overvoltage category
  III
• Nominal voltage UN
  400 V (phase conductor/phase conductor)
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Number of connections
  2
• Insulating material
  PA
• Rated surge voltage
  4 kV
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Setpoint
  1 N
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of aging test
Test passed
ASD level
1.857 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
101 mm
Connection
1st, 2nd and 3rd level
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141125
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
Nominal current IN
24 A (with 4 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.48 kA
Test spectrum
Service life test category 1, class B, body mounted
Acceleration
5g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
58 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Connection in acc. with standard
CUL
ECLASS 7.0
27141125
ETIM 7.0
EC001329
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/7,5
50.5 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Value
0.34 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141125
ECLASS 5.1
27141100
ECLASS 9.0
27141125
ETIM 6.0
EC001329
UNSPSC 18.0
39121410
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
5.2 mm
Height
48.6 mm
Connection method
Push-in connection
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410