3213950 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  5
• Degree of pollution
  3
• Overvoltage category
  III
• Open side panel
  Yes
• Result of surge voltage test
  Test passed
• Tensile test result
  Test passed
• Setpoint
  1 N
• Conductor cross section short circuit testing
  4 mm²
• Number of levels
  3
• Flammability rating according to UL 94
  V0
• Nominal current IN
  24 A (with 4 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Bending test turns
  135
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Test spectrum
  Service life test category 1, class B, body mounted
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
Width
5.2 mm
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Connection
1st, 2nd and 3rd level
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Nominal cross section
4 mm²
Rated surge voltage
4 kV
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Short-time current
0.48 kA
ASD level
0.964 (m/s2)2/Hz
Shock test result
Test passed
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141100
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Color
gray
Nominal voltage UN
400 V (phase conductor/phase conductor)
Note regarding shock protection
Depending on the end application with regard to the busbar.
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
50.5 mm
Conductor cross section AWG min.
26
Potentials
2
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Acceleration
5g
Test duration per axis
5 h
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Height
48.6 mm
Height NS 35/15
58 mm
Internal cylindrical gage
A3
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
101 mm
Connection method
Push-in connection
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.14 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141125
ECLASS 9.0
27141125
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
Min. AWG conductor cross section, flexible
26
ECLASS 4.0
27141100
ETIM 6.0
EC001329
Note
Please observe the current carrying capacity of the DIN rails.
ETIM 7.0
EC001329
UNSPSC 20.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
ECLASS 7.0
27141125
Insulating material
PA
Insulating material group
I
Value
0.34 mm²
Connection in acc. with standard
CUL
Ambient temperature (assembly)
-5 °C ... 70 °C
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141125
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Result of flexion and pull-out test
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 5.0
27141100
ECLASS 6.0
27141100