3213946 Phoenix Contact Terminal Blocks

Product Details

• UNSPSC 12.01
  39121410
• UNSPSC 20.0
  39121410
• Potentials
  2
• UNSPSC 21.0
  39121410
• UNSPSC 19.0
  39121410
• Overvoltage category
  III
• Maximum load current
  30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Nominal cross section
  4 mm²
• Color
  gray
• Degree of pollution
  3
• Nominal current IN
  24 A (with 4 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test turns
  135
• Tight fit on carrier
  NS 35
• Result of temperature-rise test
  Test passed
Note
Please observe the current carrying capacity of the DIN rails.
Rated surge voltage
4 kV
Nominal voltage UN
400 V (phase conductor/phase conductor)
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Short-time current
0.48 kA
Acceleration
5g
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
30 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
50.5 mm
End cover width
2.2 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
26
Number of connections
5
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
5.2 mm
Connection method
Push-in connection
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
ECLASS 4.1
27141100
ECLASS 9.0
27141125
UNSPSC 13.2
39121410
Number of levels
3
Insulating material
PA
Insulating material group
I
Open side panel
Yes
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Setpoint
1 N
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
48.6 mm
Height NS 35/15
58 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Value
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141125
ECLASS 7.0
27141125
ETIM 7.0
EC001329
Result of thermal test
Test passed
Result of aging test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1st, 2nd and 3rd level
Conductor cross section AWG min.
26
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141125
ECLASS 5.1
27141100
ETIM 6.0
EC001329
UNSPSC 11
39121410
Oscillation, broadband noise test result
Test passed
ASD level
0.964 (m/s2)2/Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
101 mm
Conductor cross section solid min.
0.34 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection in acc. with standard
CUL
ECLASS 5.0
27141100
UNSPSC 6.01
30211811
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410