3213944 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  2
• Overvoltage category
  III
• Nominal voltage UN
  400 V (phase conductor/phase conductor)
• Insulating material
  PA
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  1.02 W (the value is multiplied when connecting multiple levels)
• Back of the hand protection
  guaranteed
• Note regarding shock protection
  Depending on the end application with regard to the busbar.
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test duration per axis
  5 h
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Number of connections
  4
• Maximum load current
  30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
• Rated surge voltage
  4 kV
Nominal current IN
24 A (with 4 mm² conductor cross section)
Finger protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
5g
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
50.5 mm
Connection
1st, 2nd and 3rd level
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Number of levels
3
Nominal cross section
4 mm²
Insulating material group
I
Open side panel
Yes
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
ASD level
0.964 (m/s2)2/Hz
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Length
101 mm
Height
48.6 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Connection in acc. with standard
CUL
ECLASS 6.0
27141100
ETIM 6.0
EC001329
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Color
gray
Flammability rating according to UL 94
V0
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
Value
0.34 mm²
ECLASS 4.0
27141100
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
Shock duration
30 ms
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection method
Push-in connection
Stripping length
10 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141125
ECLASS 9.0
27141125
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Height NS 35/15
58 mm
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141125
ECLASS 5.1
27141100
ECLASS 7.0
27141125
ETIM 7.0
EC001329
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410