3213604 Phoenix Contact Terminal Blocks

Product Details

• Overvoltage category
  III
• Potentials
  1
• Nominal voltage UN
  800 V
• Open side panel
  Yes
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Setpoint
  1 N
• Conductor cross section short circuit testing
  6 mm²
• Result of thermal test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Acceleration
  30g
• Shock duration
  18 ms
• Static insulating material application in cold
  -60 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Stripping length
  10 mm ... 12 mm
• Conductor cross section AWG max.
  10
• Max. AWG conductor cross section, flexible
  12
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Number of levels
1
Insulating material
PA
Degree of pollution
3
Maximum load current
38 A (with 6 mm² conductor cross section, rigid)
Power frequency withstand voltage setpoint
2 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Number of connections
3
Flammability rating according to UL 94
V0
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Bending test turns
135
Tensile test result
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Connection
1 level
Nominal cross section
4 mm²
Rated surge voltage
8 kV
Nominal current IN
32 A
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Color
gray
Area of application
Machine building
Maximum power dissipation for nominal condition
1.02 W
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Short-time current
0.72 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
62.4 mm
Height NS 35/7,5
43 mm
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Internal cylindrical gage
A4
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
6.2 mm
Height NS 35/15
50.5 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm²
ECLASS 4.0
27141100
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Connection method
Push-in connection
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e