3213142 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Maximum power dissipation for nominal condition
  6.27 W
• Open side panel
  No
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Setpoint
  10 N
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• ASD level
  6.12 (m/s2)2/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height NS 35/15
  87.5 mm
• Stripping length
  10 mm
• Min. AWG conductor cross section, flexible
  16
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  1.5 mm²
• Number of levels
  1
• Rated surge voltage
  8 kV
• Insulating material group
  I
• Maximum load current
  192 A (in case of a 70 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Finger protection
  guaranteed
Result of tight fit on support
Test passed
Bending test conductor cross section/weight
25 mm² / 4.5 kg
Result of voltage-drop test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Number of connections
5
Insulating material
PA
Degree of pollution
3
Result of surge voltage test
Test passed
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Result of thermal test
Test passed
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
88.5 mm
Tightening torque, min
1.4 Nm
Conductor cross section solid min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Height
79.4 mm
2 conductors with same cross section, solid min.
1.5 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Internal cylindrical gage
A5
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Number of positions
1
Nominal cross section
70 mm²
Flammability rating according to UL 94
V0
Nominal current IN
57 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Bending test turns
135
Tight fit on carrier
NS 35/NS 32
Short-time current
1.2 kA
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
80 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
1.5 mm²
Conductor cross section flexible max.
10 mm²
2 conductors with same cross section, stranded min.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 4.1
27141100
Color
gray
Overvoltage category
III
Nominal voltage UN
1500 V DC
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
20.3 mm
Height NS 32
85 mm
Tightening torque max
1.5 Nm
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Screw connection
Screw thread
M4
Conductor cross section AWG min.
16
Conductor cross section solid max.
16 mm²
Max. AWG conductor cross section, flexible
6
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
Conductor cross section short circuit testing
70 mm²
ETIM 4.0
EC000897
ETIM 7.0
EC000897
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
UNSPSC 18.0
39121410
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
Power frequency withstand voltage setpoint
2.2 kV AC
UNSPSC 13.2
39121410
UNSPSC 11
39121410