3211022 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Degree of pollution
  3
• Nominal voltage UN
  500 V
• Power frequency withstand voltage setpoint
  1.89 kV
• Tight fit on carrier
  NS 35
• Shock test result
  Test passed
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  0.77 W
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Short circuit stability result
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Width
  5.2 mm
Connection method
Push-in connection
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Number of connections
4
Overvoltage category
III
Nominal current IN
17.5 A
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.3 kA
Result of aging test
Test passed
Test duration per axis
5 h
Color
blue
Flammability rating according to UL 94
V0
Maximum load current
22 A (with 4 mm² conductor cross section, rigid)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Bending test turns
135
Setpoint
1 N
Conductor cross section short circuit testing
2.5 mm²
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/7,5
36.7 mm
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A2
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Shock duration
18 ms
Number of levels
1
Nominal cross section
2.5 mm²
Area of application
Machine building
Rated surge voltage
6 kV
Insulating material group
I
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
48.6 mm
Connection
1 level
Stripping length
8 mm ... 10 mm
Max. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
35.3 mm
Height NS 35/15
44.2 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ETIM 2.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410