3210545 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Setpoint
  1 N
• UNSPSC 12.01
  39121410
• Width
  5.2 mm
• Shock test result
  Test passed
• Shock duration
  18 ms
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Conductor cross section solid max.
  4 mm²
• Conductor cross section AWG max.
  12
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  0.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 4.1
  27141100
• ECLASS 7.0
  27141125
• UNSPSC 6.01
  30211811
• UNSPSC 20.0
  39121410
• Number of connections
  5
• Rated surge voltage
  4 kV
• Degree of pollution
  3
• Nominal voltage UN
  250 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tractive force setpoint
60 N
Requirements, voltage drop
≤ 3.2 mV
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 9.0
27141125
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Bending test rotation speed
10 rpm
Tensile test result
Test passed
UNSPSC 13.2
39121410
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
118 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Stripping length
8 mm ... 10 mm
ECLASS 10.0.1
27141125
ECLASS 11.0
27141125
ETIM 3.0
EC000897
Ageing test for screwless modular terminal block temperature cycles
192
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
ETIM 7.0
EC001329
UNSPSC 18.0
39121410
Height NS 35/15
49.8 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC001329
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Insulating material group
I
Open side panel
Yes
ASD level
6.12 (m/s2)2/Hz
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
2.2 mm
Internal cylindrical gage
A3
ETIM 4.0
EC000901
Conductor cross section tensile test
4 mm²
Short-time current
0.18 kA
Test spectrum
Service life test category 2, bogie-mounted
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Height NS 35/7,5
42.3 mm
ECLASS 6.0
27141100
Insulating material
PA
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Result of surge voltage test
Test passed
Bending test turns
135
Result of flexion and pull-out test
Test passed
Test duration per axis
5 h
Note
Please observe the current carrying capacity of the DIN rails.
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Overvoltage category
III
Maximum load current (upper level)
16 A (with 4 mm² conductor cross section)
Power frequency withstand voltage setpoint
1.89 kV
Surge voltage test setpoint
7.3 kV
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of thermal test
Test passed
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
Back of the hand protection
guaranteed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Number of levels
3
Finger protection
guaranteed
Nominal current IN
22 A (with a 2.5 mm² conductor cross section)
Nominal current IN (upper level)
16 A (with a 2.5 mm² conductor cross section)