3210194 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Area of application
  Railway industry
• Insulating material group
  I
• Open side panel
  Yes
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Insulating material
  PA
• Maximum load current
  16 A (with 4 mm² conductor cross section, rigid)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Tight fit on carrier
  NS 35
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short circuit stability result
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/7,5
  36.7 mm
• Connection in acc. with standard
  CSA
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ECLASS 4.1
27141100
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 19.0
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Maximum power dissipation for nominal condition
0.77 W
Nominal voltage UN
400 V
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock test result
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Length
92.2 mm
Connection method
Push-in connection
Conductor cross section AWG max.
12
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141126
ETIM 4.0
EC000902
UNSPSC 11
39121410
Potentials
1
Color
gray
Rated surge voltage
6 kV
Nominal current IN
16 A
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
44.2 mm
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Conductor cross section solid min.
0.34 mm²
Number of connections
4
Flammability rating according to UL 94
V0
Overvoltage category
III
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Setpoint
1 N
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
5.2 mm
Connection
1 level
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141126
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Result of aging test
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Height
35.2 mm
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ETIM 6.0
EC000902
UNSPSC 18.0
39121410