3210542 Phoenix Contact Terminal Blocks

Product Details

• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Note
  Please observe the current carrying capacity of the DIN rails.
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• Internal cylindrical gage
  A3
• ECLASS 5.0
  27141100
• ECLASS 9.0
  27141125
• UNSPSC 7.0901
  39121410
• UNSPSC 18.0
  39121410
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
Tight fit on carrier
NS 35
Short-time current
0.48 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Nominal current IN
20 A (with a 2.5 mm² conductor cross section)
Surge voltage test setpoint
9.8 kV
Result of flexion and pull-out test
Test passed
Tractive force setpoint
60 N
Requirements, voltage drop
≤ 3.2 mV
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
99.5 mm
Height
91.1 mm
Conductor cross section flexible min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
ECLASS 4.0
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
Overvoltage category
III
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Conductor cross section tensile test
4 mm²
Setpoint
1 N
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
92.6 mm
Connection method
Push-in connection
Conductor cross section AWG min.
26
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 7.0
EC001329
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Connection in acc. with standard
IEC 60947-7-1/IEC 60947-7-2
Open side panel
Yes
Result of surge voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Height NS 35/15
100.1 mm
Conductor cross section solid max.
4 mm²
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
12
ECLASS 11.0
27141125
ECLASS 5.1
27141100
ETIM 4.0
EC000900
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
End cover width
2.2 mm
Conductor cross section flexible max.
2.5 mm²
Stripping length
8 mm ... 10 mm
ECLASS 10.0.1
27141125
ETIM 6.0
EC001329
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Color
gray
Insulating material group
I
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Number of connections
7
Insulating material
PA
Nominal voltage UN
800 V
Degree of pollution
3
Maximum load current
25 A (with 4 mm² conductor cross section, rigid)
Bending test rotation speed
10 rpm
Number of levels
4
Flammability rating according to UL 94
V0
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Nominal cross section
2.5 mm²
Rated surge voltage
6 kV
Back of the hand protection
guaranteed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3