3210538 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Maximum load current
  24 A (with 4 mm² conductor cross section, rigid)
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Setpoint
  1 N
• Conductor cross section short circuit testing
  4 mm²
• Oscillation, broadband noise test result
  Test passed
• ASD level
  0.964 (m/s2)2/Hz
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• ECLASS 5.1
  27141100
• Color
  gray
• Degree of pollution
  3
• Nominal current IN
  20 A
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Stripping length
8 mm ... 10 mm
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
Overvoltage category
III
Open side panel
Yes
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
65.5 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141141
ECLASS 6.0
27141100
ETIM 6.0
EC000901
UNSPSC 13.2
39121410
Number of connections
6
Insulating material
PA
Connection in acc. with standard
CSA
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Tractive force setpoint
60 N
Requirements, voltage drop
≤ 3.2 mV
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Number of levels
3
Rated surge voltage
6 kV
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
7.3 kV
Conductor cross section tensile test
4 mm²
Bending test turns
135
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Acceleration
5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
5.2 mm
Connection method
Push-in connection
Conductor cross section AWG max.
12
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
58 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 7.0
27141141
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
ETIM 4.0
EC000901
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Conductor cross section solid min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ETIM 7.0
EC000901
Conductor cross section flexible min.
0.14 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
102 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141141
ECLASS 9.0
27141141
UNSPSC 6.01
30211811
Note
Please observe the current carrying capacity of the DIN rails.
Internal cylindrical gage
A3
ECLASS 4.1
27141100
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410