3210500 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Number of levels
  3
• Insulating material
  PA
• Nominal voltage UN
  500 V
• Finger protection
  guaranteed
• Rated surge voltage
  6 kV
• Insulating material group
  I
• Maximum load current
  24 A (with 4 mm² conductor cross section, rigid)
• Result of surge voltage test
  Test passed
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 rpm
• Conductor cross section tensile test
  4 mm²
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test spectrum
  Service life test category 1, class B, body mounted
• Test duration per axis
  5 h
• Static insulating material application in cold
  -60 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Color
  gray
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
Open side panel
Yes
Surge voltage test setpoint
7.3 kV
Bending test turns
135
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
ECLASS 4.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Flammability rating according to UL 94
V0
Degree of pollution
3
Connection in acc. with standard
IEC 60947-7-1
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
ASD level
0.964 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
ECLASS 5.1
27141100
Number of connections
6
Overvoltage category
III
Nominal current IN
20 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Result of aging test
Test passed
Acceleration
5g
Shock test result
Test passed
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
End cover width
2.2 mm
Connection method
Push-in connection
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 11.0
27141120
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tractive force setpoint
60 N
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
65.5 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Stripping length
8 mm ... 10 mm
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC002498
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
102 mm
Height
56.4 mm
Conductor cross section AWG min.
26
Internal cylindrical gage
A3
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
58 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410