3210400 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Potentials
  2
• Rated surge voltage
  6 kV
• Overvoltage category
  III
• Nominal current IN
  16 A
• Open side panel
  Yes
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/15
  71.8 mm
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section flexible min.
  0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
ECLASS 9.0
27141126
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Number of connections
4
Degree of pollution
3
Maximum load current
16 A (with 4 mm² conductor cross section, rigid)
Power frequency withstand voltage setpoint
1.89 kV
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
127.5 mm
Height
63.1 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 7.0
EC000902
UNSPSC 20.0
39121410
Color
gray
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Setpoint
1 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
5.2 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
26
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 13.2
39121410
Number of levels
2
Insulating material
PA
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Result of surge voltage test
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
64.3 mm
Connection
1st and 2nd level
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
UNSPSC 21.0
39121410
Nominal voltage UN
400 V
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Acceleration
30g
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 11.0
27141126
ECLASS 7.0
27141126
ETIM 6.0
EC000902