3210351 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  1.5 mm²
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Maximum load current
  9 A
• Result of power-frequency withstand voltage test
  Test passed
• Number of levels
  2
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  0.56 W (the value is multiplied when connecting multiple levels)
• Open side panel
  Yes
• Result of surge voltage test
  Test passed
• Tight fit on carrier
  NS 35
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Color
  gray
• Insulating material group
  I
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 rpm
• Result of voltage-drop test
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
50.1 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
Potentials
2
Overvoltage category
III
Nominal voltage UN
400 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Short-time current
0.18 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
3.5 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Connection cross sections directly pluggable
0.25 mm² 1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ETIM 6.0
EC000902
UNSPSC 21.0
39121410
UNSPSC 20.0
39121410
Number of connections
4
Flammability rating according to UL 94
V0
Nominal current IN
9 A
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
1.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
41.1 mm
Height NS 35/7,5
42.6 mm
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 11.0
27141126
ECLASS 7.0
27141126
ETIM 7.0
EC000902
UNSPSC 19.0
39121410
Tensile test result
Test passed
Setpoint
1 N
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
86 mm
Connection
1st and 2nd level
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ECLASS 9.0
27141126
ETIM 4.0
EC000902
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
0.8 mm
Conductor cross section solid min.
0.25 mm²
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1 / B1
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410